EverWiser
Dodge Dakota
JOIN HERE
9/11/2005
14:20:08
|
 Subject: Wanna trade???
IP: Logged
Message:
Hi all. Last year I scored a NOS Mopar Performance intake manifold for the Gen1 3.9L engines (86-90). I've currently got it installed on my Dak and it's wearing a 450cfm Holley vacuum sec. carb. I also converted an old Mopar V8 distributor to utilize a hall sensor (replacembents available from Mouser, DigiKey, etc.) and made my own "star" wheel to mimic the 3.9L's firing order: 0, 128, 240, 368, 480, 608. It has the mechanical and vacuum advance to handle the timing chores. You can use any MP spring kits or vacuum advance canisters with this distributor. It's feeding it's signal to an MSD6 to provide the spark. I'm contemplating obtaining a TB and intake from a Gen1 and going the MegaSquirt route. If someone had the intake manifold, injector throttle body (injectors on the TB), all of the sensors still attached, and some cash I'd be willing to part with the MP intake, 450cfm Holley, and the modified distributor; I'll be keeping the MSD unit. Think it over and make some offers. I'll be out of town starting early Monday until Thursday so I won't be able to answer emails during that time. Thanks!
|
