Forums
Forum Tools
|
 |
22:13:33 - 04/24/2024
V6 Dakotas
| From | Message |
Relf
Dodge Dakota
JOIN HERE
9/01/2005
15:54:03
|
 Subject: Larry, timing chain, cam timing
IP: Logged
Message:
Larry, or someone who has done this before, on Larry's "timing chain and tensioner" article, I am wondering about the 1-5 degree offset keys. Larry writes, "Stock cams start to open @ 8 degrees before TDC, and closes @ 56 before bottom center, or 124 degrees after top at 0 lift". "If they are off, you need to advance or retard the cam". I was wondering if the 8 BTDC, 56 BBDC setting is just the standard stock setting from Dodge, or is this the way Larry shows us "how to degree your cam in for Max Performance"? as he mentions in the intro. to the article. I have a '98 4X4 V6 and I want to be a bit "better" than stock. Thanks guys.
Relf.
|
Relf
Dodge Dakota
JOIN HERE
9/02/2005
16:09:29
|  RE: Larry, timing chain, cam timing
IP: Logged
Message:
Bump
|
Relf
Dodge Dakota
JOIN HERE
9/06/2005
17:53:45
|  RE: Larry, timing chain, cam timing
IP: Logged
Message:
Has anybody done this mod. with the degreed keys?
Relf
|
Relf
Dodge Dakota
JOIN HERE
9/20/2005
13:34:27
|  RE: Larry, timing chain, cam timing
IP: Logged
Message:
Oh, just forget it.
Relf
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
|
