Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
00:00:29 - 04/25/2024

V6 Dakotas
FromMessage
silver02
Dodge Dakota
JOIN HERE


7/28/2005
01:33:31

Subject: injector Q's
IP: Logged

Message:
1. are the injectors hard to get out
2. would you screw anything up by taking them out
3. can you clean them an better by removing them as opposed to putting something in your fuel
4. should I just spend the ridiculous price for labor and get it done at the dealer
5. can you safely clean the IAC, MAP, IAT, & TPS sensors like with gumout or something of that nature.



98cc
Dodge Dakota
JOIN HERE


7/28/2005
17:12:24

RE: injector Q's
IP: Logged

Message:
1. no
2. you can always screw someting up if you are not careful.
3. NO
4. its your choice
5. don't do any of these unless you know what you are doing- please buy a manual.



Relf
Dodge Dakota
JOIN HERE
 Email

7/29/2005
22:47:29

RE: injector Q's
IP: Logged

Message:
Silver02, In response to your post,
1. Get a Haynes manual, or search injector removal on this site.
2. 98cc's answer.
3. Nope, run something good like seafoam or clean power (from Benicia, CA.)
4. Get the removal info. from this site and get a mechanical friend to help you if you are not confident.
5. Yes you can, but not when they're still on the throttle body. Find out how to remove them and clean them.

Good luck!
Relf.



shdow
Dodge Dakota
JOIN HERE
 Email

7/30/2005
05:51:03

RE: injector Q's
IP: Logged

Message:
I thought the injectors were failing
I put a cold air cone flter on and all is well
xtra zip

got rid of the stalling

still going to clean the throttle body one day

have three sensors on it will take photos and time and do it right



shdow
Dodge Dakota
JOIN HERE
 Email

7/30/2005
06:02:07

RE: injector Q's
IP: Logged

Message:
the IAC sensor is that the back one in the 12 oclock position? do they all have plugers?




daddio
Dodge Dakota
JOIN HERE


7/30/2005
13:11:46

RE: injector Q's
IP: Logged

Message:
yes the IAC is the one on the back of the TB and should be the only one you clean. do NOT push the plunger in or twist it. and keep track of the o-ring.
also, get at least a haynes repair manual.



suba me
Dodge Dakota
JOIN HERE
 Email

12/20/2018
14:30:22

tIebCfYHrXyPPtEc
IP: Logged

Message:
OEwBXE This very blog is obviously cool as well as factual. I have chosen a lot of interesting things out of this amazing blog. I ad love to return over and over again. Thanks a lot!



   P 1


Post a reply to this message:

Username Registration: Optional
All visitors are allowed to post messages


Name:
Email:
Notify me when I get a reply to my message:Yes  No

Icons:            

          

Subject:
Message:
 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.