Forums
Forum Tools
|
 |
20:50:30 - 04/19/2024
V6 Dakotas
| From | Message |
Kyle
Dodge Dakota
JOIN HERE
7/15/2005
09:57:07
|
 Subject: best stuff
IP: Logged
Message:
I have a 93' std cab with a 3.9
I noticed that it runs a little ruff. people have told me to change the plugs, wires, cap & rotor, and maybe the t- stat. can some one tell me what parts to get for each of these. I know every one here swears by the autolite 3923 but online it said to use 24's i have no clue as to what the difference is on any of this stuff
|
Dan M
Dodge Dakota
JOIN HERE
7/15/2005
13:13:30
| RE: best stuff
IP: Logged
Message:
The difference in the plugs is the heat range, factory or 1 colder. Most go with the 1 colder.
Seems that most go with brass cap and rotor (napa usually).
Since the upgraded cap / rotor and plugs, next logical step is to upgrade wires.
also, 180 deg tstat is an upgrade too.
if you do some searching, you'll find alot of post of all 3 of these mods.
- Dan M
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
|
