| From | Message |
Dan M
Dodge Dakota
JOIN HERE
6/04/2005
13:48:39
|
 Subject: where is vacuum line for heat/ac
IP: Logged
Message:
I have my core case removed and know why my heat and a/c controls are not working, the black line that is supposed to be connected to the engine vacuum system is not connected. all of the other lines are connected correctly according to the diagram on alldata.
I dont' see anywhere to connect it though? Anyone know where it connects at on a 95 3.9L?
- Dan M
|
Dan M
Dodge Dakota
JOIN HERE
6/04/2005
15:20:28
| RE: where is vacuum line for heat/ac
IP: Logged
Message:
Here's a picture of my vacuum lines. There are 5, 4 going to both actuators and the black that is supposed to connect to the engine vacuum system..
- Dan M
|
Dan M
Dodge Dakota
JOIN HERE
6/05/2005
20:46:55
| RE: where is vacuum line for heat/ac
IP: Logged
Message:
figured it out, runs though the firewall below the heater core lines and plugs in behind the intake. A little difficult to find, the hose off the engine is very small and hard to see with the other hoses/wires.
- Dan M
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
