| From | Message |
Jason52
Dodge Dakota
JOIN HERE
5/24/2005
00:50:19
|
 Subject: mech ???'s
IP: Logged
Message:
OK what are the best to most affordable roller rockers to use for the 3.9l. i heared of a brand that can basically bolt in and simple to install...if you have them and know the prices please let me know.....also what are good rear end swaps availiable and where can they be bought.
|
GB2000
GenIII
5/24/2005
00:59:10
|  RE: mech ???'s
IP: Logged
Message:
No clue on the rear-ends but the simple bolt-on ones with no adjustment needed are the Harland Sharp RR's. Crowers are the ones that need to have the valve lash adjusted or something like that.
Josh Blackshire - Owner, Ohio Dakotas .NET
Red 98 Dakota Sport - Check it out!
|
Jason52
Dodge Dakota
JOIN HERE
5/24/2005
01:03:20
| RE: mech ???'s
IP: Logged
Message:
WHATS THE COST OF THE HARLAND SHARPS?
|
Doug
Dodge Dakota
JOIN HERE
5/24/2005
09:02:05
| RE: mech ???'s
IP: Logged
Message:
JEGS and Summit Racing both have them for 499.99
|
Doug
Dodge Dakota
JOIN HERE
5/24/2005
09:04:01
| RE: mech ???'s
IP: Logged
Message:
The part numbers for the two bolt on sets from harland sharp are S70046 and S70047
|
J and J Auto
GenII
5/26/2005
07:29:39
| RE: mech ???'s
IP: Logged
Message:
John Merceds has the harland 1.7 S70047 for around
$300
www.southeastrt.com
Larry
J&J Auto
|
jason52
Dodge Dakota
JOIN HERE
5/26/2005
10:57:43
| RE: mech ???'s
IP: Logged
Message:
yea see i went to that web site, larry, looking for those...do i need to call him to order them or can i buy them on the web site itself? Also, larry, in your opinion is this a worth while mod and how much diff will it make with my engine adding to the exhaust sytem i havew a v8 throttle and cold air?
|
another mark
Dodge Dakota
JOIN HERE
5/26/2005
18:21:12
| RE: mech ???'s
IP: Logged
Message:
I'm running all the mods you are looking for. The roller rockers are the icing on the cake when you've done your CAI, TB and exhaust work. The differnce is the Harland Sharps are aluminum and may/will stretch over time. The Crowers/everyone else is made out of forged steel? So, obviously they don't stretch. I've been running the Harland Sharps for over a year now with no problems.
|
Wadak
GenIII
5/26/2005
19:26:42
| RE: mech ???'s
IP: Logged
Message:
I have been running a set of the Harland Sharp 1.7 RR on a 92 4x4 Dakota for over 20,000 miles and no problems with them.
92 and 97 Daks both with many mods.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
