| From | Message |
fastrdak
Dodge Dakota
JOIN HERE
3/20/2002
18:40:49
|
 Subject: How to drain your coolant for t-stat
IP: Logged
Message:
How do you drain your coolant
so it wont go every where when
installing/ changing the t-stat.
thanks
|
LI Blackdak
Dodge Dakota
JOIN HERE
3/21/2002
04:23:21
| RE: How to drain your coolant for t-stat
IP: Logged
Message:
if u have a gen 3 u dont just unbolt the house from the top of the intake manifold and its right there. not much coolant comes out. really easy once u know what to do. lucky thing i have a friend that used to work at a junk yard. otherwise for gen 1 or 2 i dont know
|
Joe E.
Dodge Dakota
JOIN HERE
3/22/2002
17:31:12
| RE: How to drain your coolant for t-stat
IP: Logged
Message:
Just unbolt the hose. A little coolant comes out no biggie. Just go to your neighbors yard and do it. The fluid will kill grass and aminals if they drink it.
Good Luck
Joe E.
|
Jon
Dodge Dakota
JOIN HERE
3/24/2002
09:36:15
| RE: How to drain your coolant for t-stat
IP: Logged
Message:
There should be a drain on the bottom of the radiator, but then you have to refill when your down so you need 3x as much coolant. Just yank the t-stat housing off and whatever comes out comes out.
-Jon
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
