| From | Message |
Randy R
Dodge Dakota
JOIN HERE
4/13/2005
05:56:49
|
 Subject: Metal Shavings in my Cooling System
IP: Logged
Message:
The water pump in my 97 Dakota 4X4 broke(specificaly the rotor came off the nut and started grinding metal shavings from the engine in my cooling system. There is a gouge on the engine surface near by where the rotor is. Do I need to be really concerned about this and mill it down or do I just put the pump on and let it go?. I will be doing an extensive flush of the cooling system of course trying to get the shavings out.
|
93dak4x4
Dodge Dakota
JOIN HERE
4/13/2005
10:03:00
| RE: Metal Shavings in my Cooling System
IP: Logged
Message:
as long as it hasnt gone through anything i say remove any burrs, put the new pump on, and let r go. shouldnt hurt anything
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
