| From | Message |
Adam
Dodge Dakota
JOIN HERE
4/07/2005
18:32:24
|
 Subject: Tps Sensor!
IP: Logged
Message:
Hey has any one hooked up their Dakota up to a scanner and looked at the Percentage of the TPS and WOT? My truck seems to only be at 75 percent at WOT. Has any one seen this problem let me know THANKS!!
|
Bob Lincoln
Dodge Dakota
JOIN HERE
4/07/2005
19:00:48
| RE: Tps Sensor!
IP: Logged
Message:
Have you done the TPS mod? If so, by throwing away the bottom end of the sensor at idle, you are probably past the top end of the sensor scale at WOT.
If you haven't done the mode, check for at least 0.2 to 0.3 volts at idle. If lower, or above about 0.8 volts, and you haven't touched it, it may need replacing.
|
Adam
Dodge Dakota
JOIN HERE
4/07/2005
19:18:39
| RE: Tps Sensor!
IP: Logged
Message:
Well Bob,
Here's the thing! I have tried a new TPS sensor and the scan tool still picks up the same reading. But the thing is I have made a new mounting plate for my TPS and it is fully adjustable, but the volts coming out are only 3.9 to 4.0 at WOT is that normal? I know on the DODGE service manual it said no more then 4.5.. But it worries me bye saying 75% at WOT ! WHAT VOLTS HAS EVERYONE ELSE GOT???
|
?
Dodge Dakota
JOIN HERE
4/08/2005
10:54:22
| RE: Tps Sensor!
IP: Logged
Message:
How much did you pay for that scantool ?
You get what you pay for..
Don't worry about the percent
unless maybe you can't " cruise on the Interstate..
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
