| From | Message |
Michael K
Dodge Dakota
JOIN HERE
4/02/2005
13:27:51
|
 Subject: Schematic for '92
IP: Logged
Message:
Tach hasn't worked since I bought it but since I changed with a '97 Magnum (puddle was deeper than I thought!), I haven't had an oil gauge. Loking to track down a schematic so I can start tracking down where the problems are. Any help would be appreciated, thanks in advance.
Michael
1992 3.9 Automatic, no A/C
p.s. I tow a 5,000 boat and trailer, I would REALLY like to have those 2 little gauges working again.
|
library
Dodge Dakota
JOIN HERE
4/02/2005
13:47:18
|  RE: Schematic for '92
IP: Logged
Message:
the auto repair books at your local library have that info in the haynes and chilton model specific repair manuals. get off your lazy butt and make the trip.
|
Rene
Dodge Dakota
JOIN HERE
4/03/2005
20:23:49
|  RE: Schematic for '92
IP: Logged
Message:
You can also go to this web site, http://www.alldatadiy.com/index.html and open an account. They have the diagrams.
|
Michael K
Dodge Dakota
JOIN HERE
4/03/2005
21:40:36
| RE: Schematic for '92
IP: Logged
Message:
Thanks Rene, I'll check it out tomorrow at work.
|
J and J Auto
GenII
4/05/2005
01:16:39
| RE: Schematic for '92
IP: Logged
Message:
Oil
sending unit or ground
back by distributor
remove plastic dash cover now the insterment pod
and check the plug on the back and all the fuses
for the tack tap on the pod sometimes they just
stick mine likes to stick on 2000rpm when its
cold a couple taps with the old knuckle and it
works fin LOL
Larry
J&J Auto
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
