| From | Message |
tjm400
Dodge Dakota
JOIN HERE
2/07/2005
10:35:28
|
 Subject: 1996 dakota 3.9
IP: Logged
Message:
This is going to be a long one,sorry.Truck has 120,000 miles on it.Its running rough,misses, sputters,back fires a little when put in gear, here's whats been done.New plugs,dist cap,rotor,wires,crank sensor,timing chain,computer.Cleaned all under hood grounds.Cleaned wire harness connection under fuse box. Cleaned fuel rail, and injectors,checked injector connection with noid light,stethoscope,working fine.codes 12 and 55.
|
Doug
Dodge Dakota
JOIN HERE
2/07/2005
11:02:44
| RE: 1996 dakota 3.9
IP: Logged
Message:
Did you try PCV Valve, Air cleaner, Vacuum check (around bolts, throttle body, and lines/hoses), compression check (min of 100psi or between 30-40psi difference between cylinders), and/or cam shaft lobe check?
|
hanzlik
Dodge Dakota
JOIN HERE
2/07/2005
12:44:44
|  RE: 1996 dakota 3.9
IP: Logged
Message:
See the response I left to FMXguy . Might help
|
?
Dodge Dakota
JOIN HERE
2/08/2005
07:42:16
| RE: 1996 dakota 3.9
IP: Logged
Message:
02 sensor ?
|
tjm400
Dodge Dakota
JOIN HERE
2/08/2005
09:30:18
| RE: 1996 dakota 3.9
IP: Logged
Message:
truck never showed code for 02 sensor.
|
daddio
Dodge Dakota
JOIN HERE
2/08/2005
11:32:45
| RE: 1996 dakota 3.9
IP: Logged
Message:
could be a worn dist drive gear & or bushing.
|
Tek
Dodge Dakota
JOIN HERE
2/08/2005
14:13:31
| RE: 1996 dakota 3.9
IP: Logged
Message:
Take it to an autozone and get the code read to find out what it is.
|
93dak4x4
Dodge Dakota
JOIN HERE
2/08/2005
15:35:32
| RE: 1996 dakota 3.9
IP: Logged
Message:
change the O2 sensor, it is a player in that problem, along with your map sensor and ait sensors.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
