Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
23:33:55 - 04/26/2024

V6 Dakotas
FromMessage
03SXT
Dodge Dakota
JOIN HERE


1/31/2005
20:31:51

Subject: So whos got the most modded 3.9?
IP: Logged

Message:
well i know it aint me all i got done is exhaust and intake. i cant decide what i wanna do next, maybe a tb spacer and highflow tb....anyways whos got the most modded 3.9?



joe
Dodge Dakota
JOIN HERE


1/31/2005
20:42:06

RE: So whos got the most modded 3.9?
IP: Logged

Message:
hey the TB spacer is a waste of money on our trucks ask around
the mod. TB or a V8 TB would however do something for ya (jet chip, roller rockers)
are others more or less in the same price range
and easy to install .........



Mike B. Perez
Dodge Dakota
JOIN HERE
 Email

1/31/2005
21:12:57

RE: So whos got the most modded 3.9?
IP: Logged

Message:
I have a Cool air intake, Jet Stage I chip, Accel Distributor cap & Wires, Denso Iridium plugs, Gibson Headers, and MSD Digital SCI + Ignition PN#6350, MSD Tach Adapter PN# 8910. I am still looking for what exhaust i am going to put...that is next. I also have sound too... (4) 6.5'' 100 watts Rockford Fosgate Punch Speakers and (2) 10''Sony Explode Subs with 1100 watts peak and 980 Watts Rockford Fosgate Punch AMP and Kenwood 640 Watt 4 Channel AMP with a Rockford Fosgate 1-Farad Capacitor (Digital)..Well that’s it...more to come...hells yea..what do you guys have..



JFH
GenII
 User Profile


2/01/2005
07:40:35

RE: So whos got the most modded 3.9?
IP: Logged

Message:
Larry has his stroked, gonna be hard to beat that.

Intense used to have a 3.9 that was turbo charged

http://www.cardomain.com/memberpage/546400

Chris
Dodge Dakota
JOIN HERE
 Email

2/01/2005
08:11:52

RE: So whos got the most modded 3.9?
IP: Logged

Message:
I have a 93 3.9 dakota with a Holley TB intake system with headers and a stage 1 chip. I have the underdrive pulleys and a K&N cold air and I would like to find out if somebody makes dome pistons for it. By the way, for any of you that want to find a set of headers, I'll warn you right now. It cost at least $500 for a good set. I have a few more good ideas to squeeze out a little more but if any of you have any ideas, let me know.



stevebdak
Dodge Dakota
JOIN HERE
 Email

2/01/2005
13:32:43

RE: So whos got the most modded 3.9?
IP: Logged

Message:
My 97 3.9l Dak has:
JBA headers, Flowmaster single in /dual out exhaust, Modified Intake manifold, V8 TB, Crower 1.7 roller rockers with guidplates and crower pushrods, Heads had a performance valve job and shaved, Underdrive pulley, MSD 6A and an Accel super coil, Black Magic 150 Electric fan, Taylor 8mm plug wires, Stage II Jet Chip, 180 degree TSTAT and a Terminal Velocity Airhat.



Jim
Dodge Dakota
JOIN HERE
 Email

2/02/2005
14:40:16

RE: So whos got the most modded 3.9?
IP: Logged

Message:
I'm 62, retired, bought my '98 r/c 2w/d 3.9 auto new in '98. Full Hotchkis 2/3 sport susp.,16 in wheels w/ Falken rubber, Powerdyne s/c, B&M floor shifter, Trans-go shift kit, bored t/b, Black Magic fan, Flowtech muffler, Taylor wires, Eichlin cap & rotor, Optima red top bat., hard tonneau w/ wing, white face gauges, shift light, Power-trax limited slip unit, and this truck still pulls 22 mpg on long trips but only 16 around town.(wife says it's due to my heavy right foot, I thought they both weighed the same)



IntenseDak39
*GenIII*
 User Profile


2/02/2005
15:21:41

RE: So whos got the most modded 3.9?
IP: Logged

Message:
my favorite 3.9 combo i had

engine

* TB0301 turbocharger
* polished .42 a/r compressor housing
* porshe blow off valve
* free flowing air filter
* turbonetics air hat
* jba driver's side shorty header
* custom passengers turbo header
* custom cross over pipe
* 2.5" single exhaust-no muffler
* gutted 2.5" cat
* modified intake manifold
* V8 throttle body
* TPS modified
* MAP modified
* IAT modified
* 24# injectors
* msd 6a ignition box
* msd 8.5 wires
* msd blaster 3 coil
* crower 1.7 roller rockers
* removed clutch fan
* removed a/c
* remote oil filter and oil cooler
* 42re w/shift kit
* b&m ratchet shifter

chassis

* cut coils front
* ladder bars
* pan hard bar
* 150# coil springs (rear)
* coilover kit
* 3-way drag shocks

bunch of weight reduction.


that was the most fun out of the V6... although when i used nitrous (no turbo then), it was a little more powerful... but i didnt need to fill up the turbo @ $2.99 a lb. ;D

i also had a powerdyne s/c on it at one point... worst thing ever.



03SXT
Dodge Dakota
JOIN HERE


2/07/2005
12:04:59

wow!
IP: Logged

Message:
wow! mines practically stock except for an intake and flowmaster. I cant really afford anything right now. Next payday i have to buy tires. i want to go with a bigger TB and spacer headers hi-flow cats and a chip, not sure if i should go with a stage 1 or 2 with all the mods i plan on doing. the stage 2 recommends getting a 180 T-Stat guess ill need to do that, any recommendations fellas? thanks.....later........



GB2000
GenIII
 User Profile


2/07/2005
14:43:58

RE: So whos got the most modded 3.9?
IP: Logged

Message:
Save your money on a tb spacer...while they are effective on some vehicles, they don't do jack for our trucks.

Josh


   P 1


Post a reply to this message:

Username Registration: Optional
All visitors are allowed to post messages


Name:
Email:
Notify me when I get a reply to my message:Yes  No

Icons:            

          

Subject:
Message:
 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.