| From | Message |
joe
Dodge Dakota
JOIN HERE
11/19/2004
11:08:02
|
 Subject: crank sensor location
IP: Logged
Message:
ok guys i have a 94
i have pics showing the location of the sensor on a 98
but before i go an jack it up an take the wheel off will mine be in the same location?
thanks in advance ..........
|
N56629
Dodge Dakota
JOIN HERE
11/19/2004
11:45:10
|  RE: crank sensor location
IP: Logged
Message:
What "wheel" are you referring to?
|
joe
Dodge Dakota
JOIN HERE
11/19/2004
12:20:22
| RE: crank sensor location
IP: Logged
Message:
LOL
that would be pass. side front
|
?????????
Dodge Dakota
JOIN HERE
11/19/2004
13:07:59
| RE: crank sensor location
IP: Logged
Message:
Same sensor, same location. Are you planing on a sensor mod?
|
J and J Auto
GenII
 
11/19/2004
14:55:48
| RE: crank sensor location
IP: Logged
Message:
On your 94 just look down by the EGR tube behind
the head pass side with a light and you will see
the sensor
No reason to remove the front tire on the G2
trucks it will not help you.
A long T-handle allen wrench on your 94 will reach
down to the bolts or an allen head socket
If your planing on the sensor mod the 94 may have
the old type with bushings the newer and
replacement sensors have a steel top and makes it
a lot eisyer to mod.
slot 3/8 move towards oil filter and be sure you
remove the rubber grommit from the hole so the
sensor will move over
3 to 4 degree advance from this mod
Larry
J&J Auto
|
93dakV64x45sp
Dodge Dakota
JOIN HERE
11/19/2004
19:33:40
| RE: crank sensor location
IP: Logged
Message:
Beware of the metal bracket on the replacement sensor. It isn't the same thickness as the original carbon composite one. If you set it over the bolt holes and push the sensor down, the sensor will bottom out before the bracket touches the engine. You need to shim under the metal bracket to get the same height as the original. I learned the hard way and cracked a brand new 50 dollar sensor. Used 3 small washers under each side between the bracket and the engine on my 2nd new one, and all is well.
|
daddio
Dodge Dakota
JOIN HERE
11/20/2004
09:26:51
| RE: crank sensor location
IP: Logged
Message:
my '00 QC 3.9 w/ 5sp manual has the "old style" plastic sensor w/ inserts. and it is the original. it's not hard to slot those holes either.
|
joe
Dodge Dakota
JOIN HERE
11/21/2004
08:35:38
|  RE: crank sensor location
IP: Logged
Message:
hey thanks guys
and yes planning on doing the mod
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
