Forums
Forum Tools
|
 |
19:13:46 - 04/24/2024
V6 Dakotas
| From | Message |
skribblz
Dodge Dakota
JOIN HERE
11/01/2004
10:46:36
|
 Subject: Engin Light (M.I.L.) came on?
IP: Logged
Message:
2001 QC 3.9 V6
14000 miles.
Why in the hell would my check engine light come on, or chrysler calls it a M.I.L. How do you find out what error code number it is?
What do I do. I don't want to take it in to Dodge and they find something wrong that isn't covered under warranty.
|
GB2000
GenIII
11/01/2004
16:28:21
| RE: Engin Light (M.I.L.) came on?
IP: Logged
Message:
Ignore the parts about misfiring...I pulled Dan's reply from another post.
-----
RE: Engine Light came on
IP: Logged
Message:
it might be a code for random misfire. assuming you still have a stock coil/ign system. it may not be able to put out enough power for that big of a gap..
Try this to get the code(s) It does not work on all dakotas, it did not work on my 98 but it works on my 00.
Without cranking the truck turn the key like this....
after the first click of the igniton switch (the steering columun unlock positon, where the {P R N D 2 1} gear selector illuminates and you can move the shift lever)
Like this;
on/off/on/off/on
then in your odomiter it will say the code(s) It says P-DONE if there aren't any codes, or after they are all listed... the code will come up like thos P0300 is random misfire. 301 through 308 (306 on a v6) is for misfinring in a specific cylinder (PO303 = misfire cylinder#3)
hope I helped
post the code here, and I (or someone else) will look it up for you....
00 CC Sport Plus 4.7L 4X4 Auto, 3:55 LSD
Flowmaster orig. 40 series (2 chamber) muffler, adjusted tps to .76V, ported TB, home brew intake setup w/K&N filter, more mods to come!!!
Dan
MOPAR=More Power!!
-----
Hope that helps...
Josh
http://www.cardomain.com/id/sentenced
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
|
