Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
23:25:11 - 04/23/2024

V6 Dakotas
FromMessage
joe
Dodge Dakota
JOIN HERE


11/13/2004
10:22:36

Subject: RE:
IP: Logged

Message:
94 sport 3.9 with a K & N drop in
& stock muffler replaced with a dyno max
20 city 22 highway

i moved the iat sensor and pulled the cap off the front of the cold air intake tube
seems i'm now getting a bit better mileage but wont know till the next long trip ....



GB2000
GenIII
 User Profile


11/13/2004
10:26:18

RE:
IP: Logged

Message:
You call that bad?!

Shoot...I usually get around 20 highway. 18.5 mixed if I keep my foot off the gas. No clue city.

Josh

http://www.cardomain.com/id/sentenced

GB2000
GenIII
 User Profile


11/13/2004
10:27:33

RE:
IP: Logged

Message:
My bad joe...didn't realize this was a multiple page post. lol

Josh

http://www.cardomain.com/id/sentenced

Brucifer
GenIII
 Email User Profile


11/13/2004
23:12:31

RE:
IP: Logged

Message:
'04 3.7L 4X4 CC Stick with CAI and Magnaflow

15mpg or so. Even with easy driving.

'Love Us with Money, or We'll Hate you with Hammers!' M&C

help me out
Dodge Dakota
JOIN HERE
 Email

11/14/2004
18:17:44

RE:
IP: Logged

Message:
i get 17mpg city and 18.5 mpg on the hi way(60-80 mph).i dont keep my foot in it all the time but i drive the truck in a spirited manner.5 speed 3.9 4x4 sport new 31 x 10.5 15 tires 3.55 gears,with 112,000 miles and running strong as ever.



xmr
GenIII
 User Profile


11/15/2004
16:23:16

RE:
IP: Logged

Message:
Best freeway milage at 70 mph average was 26 mpg most of the time I get about 24 mpg on the freeway around town it drops to 18 to 19 mpg.

'98 cc auto /Home brew cold air with K&N,Dynomax, Superchip Tuner, 1.7 RR,, F&B tb. NAPA cap and rotor, 3923 plugs,tps mod,relocated & switchable iat, 180 t'stat, Crankshaft sensor mod.,PVI,Ported and Polished manifold, bosch injectors,Black Magic Elec Fan, msd wiires

J and J Auto
GenII
 Email User Profile


11/15/2004
17:15:10

RE:
IP: Logged

Message:
22 city 24-25mpg high way 179 RWHP

1995 4X4 92 3.9 with over 100,000 miles on it

Ram air K&N exstream top on 14X3
48mm F&B, 19lb FMS injectors PVI injector system
ported and matched intake and heads
1.7 crowers one of my custom cams just little
hotter than stock .460 lift w/1.7's
4 degree crank sensor advance W/Jet stage 2 chip
stock 95 computer
new performance lifters, timming chain & tensioner
JBA, Carsound, 11748 dynomax 2.5 single tail
mandrel bent y-pipe and tail
TCI Trans-Scat shift kit A500 42RH
3.91 sure grip rear

Looks like my new stroker will be delayed again
have a 360 Vortech blower project going right now
New 5.9 from mopar 9.5 comp
272/272 .460 119 sep cam
inline fuel pump at 60psi 24lb navigator injectors
M1 intake 52mm fastman will start with 8lbs boost
crane digital 6 ign with built in boost retard

Boost will come on at 2000rpm to 5800rpm 6000 rev
limit, this motor will be around 450 HP running
through a 42RH TCI Trans

The A500 trans can handle upto 500 ponies if set
up right and you guys worrie about it being behind
a V6 they are a good trans after a little work

She will be a screamer and lots of fun to set up



Larry
J&J Auto

Wadak
GenIII
 User Profile


11/15/2004
20:28:36

RE:
IP: Logged

Message:
Best mileage to date on 97 clubcab, (with canopy or camper shell depending on the part of the country your from) 17 to 18 in heavy stop and go city driving, recent trip out of 23 on the freeway at 70 to 75mph. This truck weighs in at 4450 lbs with canopy, me and half tatnk of gas.

Mods: Custom K and N air FIPK, 48mm F&B Tb, JBA Chrome headers, FMS injectors, Stage 2 Jet chip, Custom Made Water Injection System, Crank Position Sensor Mod, Ported and Polished Intake Manifold, 1.7 Crower Roller Rockers, 70 series flowmaster, TPS adjusted to .905 volts.

Mods to come Ported and Polished Heads, Intake and Exhaust ports gasket matched, heads will be flow tested and cc'ed for uniformity in the combustion chambers, gathering the pieces to build my own flow bench, High Flow Cat, PVI injection. Enough for now, good winter project: build the flow bench and port the heads, I will practice on a used-cracked set of 3.9 heads from another Dak project. If the flow bench and head porting works out ,this same thing will be done to a 92 5.2 4x4.



Wadak
GenIII
 User Profile


11/15/2004
20:33:53

RE:
IP: Logged

Message:
I forgot to mention a couple of mods: Black Magic fan and complete MSD 6a system.

Now that winter weather is upon I would expect to see some of the "old regulars" frequent this board more often, haven't seen Tazzy, Fazdax, Dodgeboy, Diane's 88. Expect to see more posts and progress from these Dak enthusists.



  <<Oringinal Post <<Previous Page P 2


Post a reply to this message:

Username Registration: Optional
All visitors are allowed to post messages


Name:
Email:
Notify me when I get a reply to my message:Yes  No

Icons:            

          

Subject:
Message:
 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.