| From | Message |
gestalt
Dodge Dakota
JOIN HERE
9/05/2004
20:52:53
|
 Subject: 7mm Borg Warner SPark wires and MSD 6 ig
IP: Logged
Message:
Can these wires (kevlar reinforced fiber glass core) 7mm be used with a MSD 6A ignition?
also, (i did have msd wires 8.5 but i don't feel like waiting to get them) I'm hearing a short pisht sound (not a hiss) from (around) cylinder five (plug closet to driver fire wall) and when i hear it the engine stumbles. It does it in first when I take off and sometimes during acceleration. It rarely does it when I'm in park.
thanks for the help
|
J and J Auto
GenII
9/07/2004
15:37:46
|  RE: 7mm Borg Warner SPark wires and MSD 6 ig
IP: Logged
Message:
Yes but a little on the small side would not run
them 2 long, the MSD multi strike system and one
of there hot coils will eat stock wires burning
the ends off 7mm is a stock size wire
The noise could be a bad plug or the seal washer
fell off the plug on the way in check and replace
that plug
posible exhaust or intake leak
Larry
J&J Auto
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
