Forums
Forum Tools
|
 |
10:13:58 - 04/26/2024
V6 Dakotas
| From | Message |
Slow4x4Dak
Dodge Dakota
JOIN HERE
8/28/2004
01:51:28
|
 Subject: 5.9 turbo on a 3.9
IP: Logged
Message:
My friend has a turbo system on his 5.9 r/t, and he ran 7lb boost. He is selling his truck, and taking off the turbo and offered it to me for 500. Will I be able to modify a 5.9 r/t turbo for a 3.9 engine? And if I put it on, is there anything else I'd have to change with my truck to handle the added stress? I'd even be willing to run low boost as my truck is a daily driver.
2002 Dakota Sport cc 4x4, 3.9 5spd,
Jet stage2, flowmaster 40 series catback, custom CAI, IAT relocated, modded intake manifold, 50mm tb, tb spacer (came with tb, so why not) and Crankshaft sensor mod
|
Gene
Dodge Dakota
JOIN HERE
8/28/2004
08:41:56
|  RE: 5.9 turbo on a 3.9
IP: Logged
Message:
Well first of all, you have a V6, and he has a V8. So the exhaust manifolds will be different and you will have to find those somewhere or custom make them. I don't think 7 lbs of boost is quite much so I wouldn't worry about stress on your engine. If you wanted some real power, you could upgrade all your engine internals and crank the boost up. If it was my truck that is what I would do first.
|
Slow4x4Dak
Dodge Dakota
JOIN HERE
8/28/2004
14:44:00
| RE: 5.9 turbo on a 3.9
IP: Logged
Message:
I don't really want the amazing power boost or anything...I just want to take my truck from 16's down to 15's or even 14's...It's no race truck, but I was hoping the turbo would do well on it....so all I need is a new exhaust manifold?
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
|
