Forums
Forum Tools
|
 |
10:26:03 - 04/25/2024
Custom Style
| From | Message |
KCDak
GenIII
 
3/04/2002
09:59:50
|
 Subject: Flush-mount IAT Adjuster
IP: Logged
Message:
Has anyone here flush mounted their IAT Adjuster in their dash so that it was apart of the dash? Right now I have mine velcro'd to the dash, just to the left of the steering wheel, but I want a more custom look and so I think that I will be mounting it in the dash. I just wanted to see if anyone else has done this.
Thanks,
Jason
'00 Sport Quad 4.7L 4x4 3.55, Autolite 3923's, BFG AT T/A,
IAT Adjuster, 360° Air Intakez, Robert Shaw 180° thermostat,
Line-X sprayed bed and nerf bars, Roll-n-Lock tonneau
|
SMITTY2
Dodge Dakota
JOIN HERE
3/04/2002
21:47:46
| RE: Flush-mount IAT Adjuster
IP: Logged
Message:
Hey Jason,
A good spot to put it is on the lid of the console in the middle, that is if you have a console. With a little something pressed behind it, it will actually hold itself in place. That way no one sees it and you don't have to destroy anything.
|
KCDak
GenIII
3/04/2002
23:01:00
| RE: Flush-mount IAT Adjuster
IP: Logged
Message:
I have thought about that, but I have the console that hinges at the rear instead of the passenger side, so it would make it a little awkward for me to open it up to adjust it. Plus living in the mid-west with this indecisive weather, I have to change it quite often. Such as last Sunday was in the 70's and then Monday was in the 20's. So you can see that I would have to change it fairly often. Anyway, it is still a good idea...if only I had that type of console.
Thanks again,
Jason
'00 Sport Quad 4.7L 4x4 3.55, Autolite 3923's, BFG AT T/A,
IAT Adjuster, 360° Air Intakez, Robert Shaw 180° thermostat,
Line-X sprayed bed and nerf bars, Roll-n-Lock tonneau
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
|
