Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
14:12:47 - 04/26/2024

Custom Style
FromMessage
slimy
Dodge Dakota
JOIN HERE


7/21/2004
14:43:35

Subject: tonnaeu covers?
IP: Logged

Message:
i know this has been posted a million times but what is the best soft tonnaeu cover to get? snaps or velcro, what brand, and other things you like or dislike about them? need one to last the cold winters and need to be able to roll up to haul tall stuff. thanks for any help.



slimy
Dodge Dakota
JOIN HERE


7/21/2004
14:46:08

RE: tonnaeu covers?
IP: Logged

Message:
i found a new extang with snaps that can roll up for 174.00 on ebay. is that good or bad



Brooks
Dodge Dakota
JOIN HERE


7/22/2004
07:42:45

RE: tonnaeu covers?
IP: Logged

Message:
Don't do it. The covers with the snaps suck. Eventually the snaps will take to much wear and tear, and will break, and the cold winters will make it even tougher on them. Plus for $175, you would be better off going to your local auto parts store, because after shipping you would more than likely go over $200. My suggestion would be to get an Extang Tuff Tonneau, and go with the snap-less type. It's not velcro, and it doesn't snap, it uses a rubber hook the lenght of the cover that hooks to the rail. I have one it works great, easy to install, and when you want to rool it up, you just unclip the back rail, and roll the cover up and velcro it by the cab. I love mine, it looks a lot better than covers that snap, and I have never had a problem with it. I bought it at a local proformance shop for $220. In my opinion this is the one to go with.



slimy
Dodge Dakota
JOIN HERE


7/22/2004
08:42:55

RE: tonnaeu covers?
IP: Logged

Message:
do u have any pics of this cover? im kinda confused by how it fastens down. does it fasten on the side at all then? does it have supports in the middle to keep it from saggin? sounds by the way u talk to be pretty nice. thanks for the help.
oh the one on ebay has free shipping but it might not be a good one though



Brooks
Dodge Dakota
JOIN HERE


7/22/2004
10:40:30

RE: tonnaeu covers?
IP: Logged

Message:
This should tell you all you need to know, I think for the $50 more it is worth it. But this is only my opinion. I got one back in April, and I love it. You should be able to find it for about $220, so it may be worth looking into. And just a piece of advice, if you buy a vinyl cover, put some armoral or 2001 protectant on it everytime you wash it, and it will keep it looking like new, and it gives it a great shine too.

http://www.extang.com/docs/tufftonno.html



Jag
Dodge Dakota
JOIN HERE
 Email

7/25/2004
23:24:13

RE: tonnaeu covers?
IP: Logged

Message:
Is extang our only options? I don't like the idea of the snap type either.



Lurkin
Dodge Dakota
JOIN HERE


7/26/2004
10:09:29

RE: tonnaeu covers?
IP: Logged

Message:
Extang makes snap and J-hook covers. While I agree with the above posters that the snaps may wear out and be a pain in the cold, I chose to buy the snap cover as it was the only one that allowed me access to the front of the bed without taking more then the front corner off.

Now that I have the cover though, I find that I don't access the front very much. I would recommend going with the J-hook' cover.

One last note is that the snap cover has not been problematic to deal with, for me anyway, as I live in a warm climate (Houston area).

I purchased mine cover from the following link for around $165 (shipped to my door).

http://www.truckxpressions.com/10off/




WAM
Dodge Dakota
JOIN HERE
 Email

7/26/2004
20:12:09

RE: tonnaeu covers?
IP: Logged

Message:
I bought an EXTANG FULL TILT soft cover.

It lifts up like a hard cover or it can be removed, in a minute, intact with the snaps in place.

Its great, I paid about $230 for it from Summit Racing.

Find EXTANG's web site and you can see it.

I found EXTANG's middle and last bow very very hard to put on. I cut about 1/4 inch off and it solves the problem.





WAM
Dodge Dakota
JOIN HERE


7/26/2004
20:16:37

RE: tonnaeu covers?
IP: Logged

Message:
Sorry, I got the price wrong it was about $330.



   P 1


Post a reply to this message:

Username Registration: Optional
All visitors are allowed to post messages


Name:
Email:
Notify me when I get a reply to my message:Yes  No

Icons:            

          

Subject:
Message:
 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.