Forums
Forum Tools
|
 |
19:04:08 - 04/26/2024
Custom Style
| From | Message |
Matt
Dodge Dakota
JOIN HERE
6/29/2004
00:19:46
|
 Subject: Diamond Clear lights.
IP: Logged
Message:
I just ordered the diamond clear combo (headlight and turn) for my 99 Dak from PCP. If anyone has them, were they hard to install? what all do you need to do, cause when i look at the lights on the truck, it seems like i have to unbolt a lot just to get them out? and do you have to wire in the side marker, or can i just plug the hole? thanks guys.
|
greendak
Dodge Dakota
JOIN HERE
6/29/2004
19:01:11
|  RE: Diamond Clear lights.
IP: Logged
Message:
yep. ya gotta wire in the new side markers. not too hard. just splice and tape. to take out the headlights and turn signals, there will be a screw in between each headlight/turnsignal. if ya look through the gap between the headlight and turnsignal, you'll see it. take the screws out(they take a torx screwdriver to get them out) and then just twist the bulb housings and they'll come out. after the corners are out, you'll see three bolts holding the headlights in. take those out and you're ready to go. have a nice day!!
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
|
