| From | Message |
Thebadguy
Dodge Dakota
JOIN HERE
5/26/2004
14:21:13
|
 Subject: M3 mirrors
IP: Logged
Message:
hey I bought m3 mirrors with the blue LEds in them.
Before I try to install them does anyone have any tips on how to do this. like if I need specail screws or anything like that? I have no doubt these will look great after seeing other trucks on this site.
Thanks in advance
Ed
|
dak2000
Dodge Dakota
JOIN HERE
5/26/2004
17:34:10
|  RE: M3 mirrors
IP: Logged
Message:
hey they go on real easy but im still trying to find out how i can hook them up to the turn signals? thats all if you find out tell me dave_1_8@hotmail.com
|
thebadguy
Dodge Dakota
JOIN HERE
5/26/2004
20:26:02
| RE: M3 mirrors
IP: Logged
Message:
I am not going to try hooking to tunr signal since they are blue I'll just hook them to the rest of my blue kit
|
IntenseDak39
*GenIII*
5/27/2004
09:23:45
| RE: M3 mirrors
IP: Logged
Message:
mine was pretty easy to install. I dont remember the company i bought them from but some cheap ass place on eBay. Only thing is i had to get some washers for the screws they provided for me.
6.6 Lt. Big Block, 727 TF shift kit, 452 heads, edelbrock 750 cfm, .513/.513 284/300 crower cam, comp cams springs, comp cams pushrods, 1.5 roller rockers, dp intake, mopar ignition, mopar windage tray, dual exhaust w/ 40 series flowmasters, 4.10 gears, coilover drag suspension, approx, 3500 lbs
|
steve Baldwin
Dodge Dakota
JOIN HERE
5/27/2004
11:49:49
| RE: M3 mirrors
IP: Logged
Message:
I pulled 2 wires thru the firewall on the drivers side. I tried LED lights before and they did not work properly, so I did not wire up the turn signal part. I spliced the 2 wires to the clear corner parking light. From both mirrors, I ran 2 wires and made a connection box under the dash and connected up the lights from both mirrors to the 2 wires that I pulled thru the firewall. Mirrors light up when turning on parking lights. I assume that you could pull 2 more wires thru the firewall and splice them to the turnsignal lights and run another wire from each mirror and connect up the turn signals.
|
DakotaJeff
Dodge Dakota
JOIN HERE
5/27/2004
16:41:22
| RE: M3 mirrors
IP: Logged
Message:
I tapped into a wire on the back of the headlight switch ..so they come on with my parking /headlights...still gotta figure out the turn-signal part. Not sure if the rear light wiring harness runs through the cab or not.
Ciao
Jeff
www.angelfire.com/nj4/low99kota
|
Universal_car
Dodge Dakota
JOIN HERE
12/31/2007
08:59:12
| RE: M3 mirrors
IP: Logged
Message:
Just thought that i would let you know that i sell teh M3 style mirrors on ebay with the built in LED. The item number is 150200192995, i have benn selling these for over a year and have sold over 100 sets. If you are interested in purchasing a set then please drop me an email at universal_car_modifications@yahoo.co.uk and i will offer you a discount. Good luck with the rest of your mods.
Regards
Universal_car_modifications_uk
|
Thumper-XPL
Dodge Dakota
JOIN HERE
4/10/2008
17:06:34
| RE: M3 mirrors
IP: Logged
Message:
Tell you what - I am MORE interested in how to hook up the power mirror option.
I have black/red/white wires off the mirror and the dakota has blue/green/white wires off the switch. I tried a few combinations but just not getting it. No instructions came with the mirrors from my ebay purchase and the person selling them would not respond after the sale.
Anyone know? Im pretty sure the blue wire on the Dak is the ground. I KNOW the black wire on the mirror is ground. Red controls the up/down motor and the white controls the l/r motor. So, I have tried, but not getting much results. Battery straight to the mirror wires tells me the motors all work fine.
Anyone with experience????
|
jusgotadakota
Dodge Dakota
JOIN HERE
5/30/2008
17:50:40
| RE: M3 mirrors
IP: Logged
Message:
did u get those power mirrors figred out, i was thinkin about buy a pair of m3 as well...
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
