| From | Message |
KovzR6
Dodge Dakota
JOIN HERE
4/07/2003
19:58:27
|
 Subject: anyone have this ROLLPAN?
IP: Logged
Message:
i have been doing some searching for rollpans and i came across this site.
fiberglass rollpans for 97+ dakota are $70 USD/ $105 CND
.... also shipped C.O.D.
http://www.fiberglassrus.com/rollpans.htm
ANYONE HAVE ONE OF THESE???????
|
Matt
Dodge Dakota
JOIN HERE
4/07/2003
22:39:11
| RE: anyone have this ROLLPAN?
IP: Logged
Message:
Don't get that rollpan. it doesnt even have a picture of it, it might look like crap! My rollpan i currently have is APC. It's fiberglass and it only cost me 85$ from Stylinconcepts.com .
But, i had to get it professionaly installed because it would not fit correctly! it fits now and looks really good. Also, i had to make my own light for it. I went to auto zone and bought a light for 3$ and used the bumper wiring and drilled it in and it works good.
The total price for it bought $85, painted $30, and installed $40, was $155. I think thats a good buy. Here's a pic of the rear of my truck.
|
janesy
Dodge Dakota
JOIN HERE
4/07/2003
22:52:03
| RE: anyone have this ROLLPAN?
IP: Logged
Message:
i have an apc roll pan on my 93, it is also fiberglass, at any speed over 130kmh it flutters around, so i'm told, i can't see it. spend the cash and get steel
|
Matt
Dodge Dakota
JOIN HERE
4/08/2003
08:37:46
| RE: anyone have this ROLLPAN?
IP: Logged
Message:
My rollpan doesnt flutter around. I go around 115 mph and it still doesnt flutter, but again, I had to pay $ to get it professionally installed. If u plan on installing it yourself, i reccommend a steel one. but if not, get the fiberglass one, its cheaper and looks better.
Matt
|
jay
Dodge Dakota
JOIN HERE
4/08/2003
14:44:58
| RE: anyone have this ROLLPAN?
IP: Logged
Message:
hey matt, what site did u get that roll pan off of
|
Matt
Dodge Dakota
JOIN HERE
4/09/2003
08:19:50
| RE: anyone have this ROLLPAN?
IP: Logged
Message:
i got my rollpan from www.stylinconcepts.com, its a very good website to buy truck stuff from. Thanks
Matt
|
pelly3s
Dodge Dakota
JOIN HERE
4/09/2003
10:08:40
| RE: anyone have this ROLLPAN?
IP: Logged
Message:
steel roll pans are the way to go. you can't mold a fiberglass one to the body, and who really wants to see body lines.
|
ZenDak
Dodge Dakota
JOIN HERE
4/09/2003
12:54:20
| RE: anyone have this ROLLPAN?
IP: Logged
Message:
Ya, go w/steel. I have the Sir Micheals on mine,,smooth, and straight across on the bottom. Looks great on my truck.
You can contact john mercedes (got a good deal on mine)
jmmtsb@prodigy.net
|
bigdawg
Dodge Dakota
JOIN HERE
4/09/2003
17:40:29
| RE: anyone have this ROLLPAN?
IP: Logged
Message:
i had a fiberglass rollpan and i didnt like it.if you want a good rollpan get the streetscenes one, it in made of urethane and you can practically twist it in half so it would be good if someone bumps into you and it has good lines
|
benzdak
*GenIII*
4/09/2003
20:39:02
| RE: anyone have this ROLLPAN?
IP: Logged
Message:
I love my steel rollpan too.
Check Out My Ride www.benzdak.com
|
bastard
Dodge Dakota
JOIN HERE
4/10/2003
00:51:17
| RE: anyone have this ROLLPAN?
IP: Logged
Message:
what u dumb f u c k? u cant mold a non-metal rollpan/? how the f u c k do u think all those ricers mold in thier body kits u cock f u c k? all u do is fab up reinforcement brackets for the back, and "mold" it in punk
|
pelly3s
Dodge Dakota
JOIN HERE
4/10/2003
07:12:56
| RE: anyone have this ROLLPAN?
IP: Logged
Message:
molding non-metal is one of the worst things to do. have you ever tried to mold fiberglass to metal it doesnt happen. it crack and nothing looks right. i don't care how much reinforcement you put behind the roll pan the seem between the 'glass and metal is gonna crack, i am 99% sure. plus if anyone is from cold weather areas they know that 'glass can be terrible in the winter, i don't know how many cracked 'glass panels i see because of the weather.
|
Dakota
GenIII
4/10/2003
08:47:01
| RE: anyone have this ROLLPAN?
IP: Logged
Message:
I love my fiberglass Lund one...only I changed it a bit...
-Dakota
3" Body Lift
Quick D Intake
Dynomax Race Magnum Exhaust
33x12.5x15 Super Swamper Thornbirds
Dakota.4mg.com
|
DakSport
Dodge Dakota
JOIN HERE
4/13/2003
02:53:28
| RE: anyone have this ROLLPAN?
IP: Logged
Message:
Sr. Michaels or a steel one are the only way to go. My buddy had a fiberglass one on his truck and within a year it was staring to crack
|
dkota_rt
Dodge Dakota
JOIN HERE
4/13/2003
11:19:30
|  RE: anyone have this ROLLPAN?
IP: Logged
Message:
I am pro Steel. Check out my pic of the Sir Michaels. It is the best made!
http://photos.yahoo.com/bc/jjdak2002/vwp?.dir=/2003+Dakota+RT&.src=ph&.dnm=DSCN0017.jpg&.view=t&.done=http%3a//photos.yahoo.com/bc/jjdak2002/lst%3f%26.dir=/2003%2bDakota%2bRT%26.src=ph%26.view=t
I have had it on for about 4 months now and everyone thinks its a factory roll pan. Thats how perfect the look is with the body lines. I have absolutely had NO problems with this roll pan and installatiion was easy.
|
DakSport
Dodge Dakota
JOIN HERE
4/14/2003
11:44:43
| RE: anyone have this ROLLPAN?
IP: Logged
Message:
dkota_rt how did you put the license plate light on it. I was just looking at it and the space where it goes looks a bit dif.
THanks
|
dkota_rt
Dodge Dakota
JOIN HERE
4/14/2003
12:03:00
| RE: anyone have this ROLLPAN?
IP: Logged
Message:
DakSport--I just mounted the plate & license plate frame to the pre-drilled holes in the roll pan. It seems to fit perfect to me.
Is there an other way, or did I do something wrong?
|
DakSport
Dodge Dakota
JOIN HERE
4/14/2003
12:07:24
| RE: anyone have this ROLLPAN?
IP: Logged
Message:
opps. i was talking about the light for the licence plate
|
dkota_rt
Dodge Dakota
JOIN HERE
4/14/2003
12:09:09
| RE: anyone have this ROLLPAN?
IP: Logged
Message:
The light was a flush mounted halogen that Sir Michaels provided with the roll pan. It looks great in the day and at night.
|
DakSport
Dodge Dakota
JOIN HERE
4/14/2003
12:11:05
| RE: anyone have this ROLLPAN?
IP: Logged
Message:
humm. Doesnt look like i got one of those. I thought that you had to use the stock one.
|
dkota_rt
Dodge Dakota
JOIN HERE
4/14/2003
12:31:32
| RE: anyone have this ROLLPAN?
IP: Logged
Message:
My roll pan had a rectangular cut-out in the top of the license plate cut-out. The halogen light mounted up flush and is held in place with 2 screws. The wires had to be spliced into the factory harness, but that was simple. You should contact Sir Michaels if you did'nt receive that setup. It may have been something they did recently to their roll pans or something they forgot to put in your package? That halogen light is much brighter than the factory lights and fits nicely. Good luck
|
dkota_rt
Dodge Dakota
JOIN HERE
4/14/2003
12:35:09
| RE: anyone have this ROLLPAN?
IP: Logged
Message:
My roll pan had a rectangular cut-out in the top of the license plate cut-out. The halogen light mounted up flush and is held in place with 2 screws. The wires had to be spliced into the factory harness, but that was simple. You should contact Sir Michaels if you did'nt receive that setup. It may have been something they did recently to their roll pans or something they forgot to put in your package? That halogen light is much brighter than the factory lights and fits nicely. Good luck
Heres the link to sir Michaels that says "flush mounted licence plate light included"
http://www.sirmichaels.com/frroll.asp
|
DakSport
Dodge Dakota
JOIN HERE
4/14/2003
16:32:22
| RE: anyone have this ROLLPAN?
IP: Logged
Message:
Thanks for the info. Im gonna look around put im sure i didnt get anything else other then the rollpan.
thanks
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
