| From | Message |
ShawnGuru
Dodge Dakota
JOIN HERE
8/04/2002
20:20:15
|
 Subject: Clear Corners Getting Moisture Inside
IP: Logged
Message:
I recently got clear corners for my dakota and a couple days later i noticed i have some moisture inside of them, I figured it wasn't good. Or is it normal? And is there anything i can do to keep it out?
|
DAKOTAKIDD
Dodge Dakota
JOIN HERE
8/05/2002
21:32:24
| RE: Clear Corners Getting Moisture Inside
IP: Logged
Message:
There are a couple of threads on this and they say to seal all joins with silicone and this should cure it.. Last chance you could drill a couple of small holes in the bottom of them for drainage.
C..
|
Tim
Dodge Dakota
JOIN HERE
8/05/2002
21:36:11
| RE: Clear Corners Getting Moisture Inside
IP: Logged
Message:
Shawn I had the same problem with mine. The part of the light that doesn't have a bulb was collecting moisture on mine. All i did was drill a really small hole in the bottom of it and it cleared up in about twenty minutes out in the sun. Hope this helps.
|
pappie1
Dodge Dakota
JOIN HERE
8/06/2002
22:39:53
|  RE: Clear Corners Getting Moisture Inside
IP: Logged
Message:
Ya ...... do something!!!!! Mine collects water too! I ignored it thinking it would just evaporate and it turned all the reflective crome to black! Looks like the truck got popped in the eye! total waste!!!
|
LiveDakota
Dodge Dakota
JOIN HERE
8/08/2002
21:01:48
| RE: Clear Corners Getting Moisture Inside
IP: Logged
Message:
Mine was doing the same thing when i first got them. All it was for me was some small holes where another bulb might fit in. Just fill the whole or cover it with something so that the moisture cant get in it. Hope this helps.
|
Drew
Dodge Dakota
JOIN HERE
8/08/2002
23:20:50
| RE: Clear Corners Getting Moisture Inside
IP: Logged
Message:
WHICH BRAND WAS THIS!?!?!
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
