| From | Message |
Urhistory
Dodge Dakota
JOIN HERE
4/01/2002
22:27:40
|
 Subject: Paint codes and Bed length
IP: Logged
Message:
I am wondering about the paint codes. I have a graphite truck and I think the paint code is PDR. Does that sound right? For some reason I thought it would be longer/more complex then that. Also, I ordered a tono(sp) cover and they asked me if I had the standard 6 foot bed, without measuring I said yes. I have a '02 CC and when I measured the bed it was 76 inches (6' 4") would this be a "standard 6 foot bed". Sorry about the long post, but thanks for all of the help
|
Bill
Dodge Dakota
JOIN HERE
4/02/2002
07:18:36
| RE: Paint codes and Bed length
IP: Logged
Message:
Not sure about the paint codes, but I too have a CC and when I ordered my ARE tonneau cover, they just asked what kind of Dakota I had (CC, QC, RC) and that was it. If they know what kind of truck you have, then you should be fine.
Bill
http://members.aol.com/btaylor04/BTruck.html
|
mikem
Dodge Dakota
JOIN HERE
4/04/2002
16:48:07
| RE: Paint codes and Bed length
IP: Logged
Message:
The paint code should be on the drivers door. There is a sticker you can see near the bottom of the door when opened.
|
Kris
Dodge Dakota
JOIN HERE
4/04/2002
18:37:18
| RE: Paint codes and Bed length
IP: Logged
Message:
my paint code was under my hood, not in the door jam.
|
kryp2nite
Dodge Dakota
JOIN HERE
4/05/2002
08:39:14
| RE: Paint codes and Bed length
IP: Logged
Message:
mines in my glove box
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
