Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
04:50:22 - 03/29/2024

Raised / Lifted Dakotas
FromMessage
kc8lbn
Dodge Dakota
JOIN HERE
 Email

7/05/2002
20:04:22

Subject: Solid axel Questions/ opinions
IP: Logged

Message:
I am getting closer to installing a leaf sprung solid dana 44 axel in the front of a 96 dak.

I need to order the springs I want to run up front only I am not sure which ones to get 4" or 6" lifted Chevy fullsize springs. I want to run a 38" swamper but I don't want the extra 2" if I don't need it.

Thanks for any help or opinions...



Brent88
Dodge Dakota
JOIN HERE
 Email

7/05/2002
22:30:12

RE: Solid axel Questions/ opinions
IP: Logged

Message:
well if you know that you need at least 4" of lift but your unsure about going to 6", you could just get the 4" springs and if you really do need that extra 2" after you instal them then you could get a set of 2" shackles to get you up there. but ya know that all depends on how your going to set this up and stuff... im just throwing my ideas in. if your pretty close to doing this then id like it a lot if you kept me informed on how the process is going, and send me some before and after pics if you can. later
robertsgroup@narrows.com



scott
Dodge Dakota
JOIN HERE


7/06/2002
07:59:18

RE: Solid axel Questions/ opinions
IP: Logged

Message:
I say if your not sure always go bigger.It would look and perform better with the truck 2in. more off of the tires than it would if they rubbed.
I had most of the items and was ready to do my own swap on my 99 CC Dakota when I realized it was just to small inside for my growing kids.
I was going to go with the 6in. springs or the King Off-Road coilovers. Good luck and let us know what happens.



LIL STOMPER
Dodge Dakota
JOIN HERE


8/19/2002
04:06:01

RE: Solid axel Questions/ opinions
IP: Logged

Message:
Go 6"s my freind I have an 88 dakota with 38-12.5 swamp's 15-10s. I did a solid axle conversion which amounted to about 4"s of suspension & 3" body & I still rubb when articulatting. good luck it's a chore if you do it the back yard.



Brent88
Dodge Dakota
JOIN HERE


8/19/2002
18:16:24

RE: Solid axel Questions/ opinions
IP: Logged

Message:
wow crap! hey lil stomper id really like to see some pics of your truck and if you could tell us more about how you did the coversion that would be great man. later



LIL STOMPER
Dodge Dakota
JOIN HERE


8/19/2002
18:45:10

RE: Solid axel Questions/ opinions
IP: Logged

Message:
BRENT88 I AM GOING TO A PLACE CALLED THE JEEP BOWL WITH MY LITTLE BIG TRUCK THIS WEEKEND & HOPEFULLY I'LL BE ABLE TO GET SOME GOOD STOMPIN PICS. 1ST OF ALL IN MY CONVERSION I MASSECRED A 67 FORD BRONCO THEN I WENT TO WORK ON MINE.I USED 2" OVER COIL SPRINGS,RECESSED THE BRONCOS SPRING TOWERS INTO THE FRAME ABOUT 2"S TO KEEP THE SPRINGS STANDING STRAIGHT UP & DOWN ,BUILT MY FRAME UP AROUND TOWERS INSIDE AND OUT. SET MY TRAC BARS BUILT A GOOD HEAVY BRACKET & WELDED EM UP. PUT 4" BLOCKS UNDER THE BACK ALONG WITH THE BRONCS REAR AXLE.I'M RUNNIN 4:10-4:11S. I DOUBT MY 95 WILL SEE IT'S HIEGHT ANY TIME SOON.



Brent88
Dodge Dakota
JOIN HERE
 Email

8/20/2002
22:47:13

RE: Solid axel Questions/ opinions
IP: Logged

Message:
sweet deal man, sounds fun. yeah when you get back just post 'em or email them to me. later



   P 1


Post a reply to this message:

Username Registration: Optional
All visitors are allowed to post messages


Name:
Email:
Notify me when I get a reply to my message:Yes  No

Icons:            

          

Subject:
Message:
 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.