Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
18:21:30 - 03/28/2024

Raised / Lifted Dakotas
FromMessage
TX-Hop
Dodge Dakota
JOIN HERE
 Email

6/20/2002
16:00:55

Subject: W00T!! Rancho 3" installed!!
IP: Logged

Message:
Well, I got my lift finally. Took a week to get all the parts and put them all on..
The whole front end was rebuilt, steering knuckles, tie-rod ends, ball
joints, idler and pitman arm, rotors, calipers, and pads. Glen was nice
enough to host some pics for me. Here they are for your viewing pleasure.
=))

http://glen.dodgedakotas.com/hop/

Laters,HOP.
Houston,TeXas
Metallic Red 97 SLT CC 4x4 5.2Mag 3.55 LSD
Flomaster 3"Custom cat-back, 180 Tstat,
MSD 8.5wires,Accel Brass cap& rotor,
K&N Drop-in,Auotlite 3923's,
Pirelli 32x11.50x15, Westin Nerf bars,
Tinted windows,VentShade's,
BugDeflectorII, Extang BlackMAX Tonneau,
Rancho 3" Lift And a NEW DML STICKER!!...



Dr.Dakota
Dodge Dakota
JOIN HERE


6/20/2002
16:23:38

RE: W00T!! Rancho 3" installed!!
IP: Logged

Message:
Truck looks good! Is that the Rancho suspension lift that everybody is waiting for? I thought it wasn't going to be out 'till fall? And it was going to be 2.5"? I can't tell from the pix, but are the ends of the torsion bars relocated too to keep the proper geometry? How much did it cost, the entire package. Any info would be great. thanks!



arthur
Dodge Dakota
JOIN HERE
 Email

6/20/2002
16:46:26

RE: W00T!! Rancho 3" installed!!
IP: Logged

Message:
His is a 97 Dakota 4X4



born2steel21
GenIII
 Email User Profile


6/20/2002
17:47:43

RE: W00T!! Rancho 3" installed!!
IP: Logged

Message:
Finally...someone posted some better pics of the rancho lift. Truck looks good...mines coming in a couple of weeks. Was it hard to install? Any particular difficulties? I want to install mine myself and save the money so any help would be appreciated.

-- Death Before Dismount --

Tx-Hop
Dodge Dakota
JOIN HERE


6/20/2002
19:26:24

RE: W00T!! Rancho 3" installed!!
IP: Logged

Message:
I didn't do the installation.. I'm limited to time, tools, and a place to do it. Plus the whole front end was rebuilt. Since they had it all apart i had them replace anything that looked bad and then some. It needs to break in a bit them i'm going to crank the torsion bars up an inch or so.. it's still a little low in the front end. I'm waiting for the tires i have on it to wear out then i'm getting new wheels and tires. I'm hoping to fit some 33x13.5's on it on a 10" rim.. I have yet to pick a tire or rim out. And i've yet to find anyone who has put a rancho 3" on by it's self. Most i've seen are 3" rancho and 3" body lift. So if you know of anyone running a 3" rancho lemme know, i need to ask some questions about backspacing and rim/tire size.. Later, Hop



Hawkeye
*GenIII*
 Email User Profile


6/20/2002
19:37:15

RE: W00T!! Rancho 3" installed!!
IP: Logged

Message:
Dont think you'll be able to run the 10 inch rims Hopster, but hey, what do I know. Give it a shot.



Blizzard
*GenIII*
 User Profile


6/20/2002
21:56:36

RE: W00T!! Rancho 3" installed!!
IP: Logged

Message:
I agree with Hawk on the tire/wheel situation, hop ... but good luck anyway!

Truck's lookin goooood!

'01 QC 4x4
5.9L, 3.92 LSD, loaded
shakin-notstirred.tripod.com

Tx-Hop
Dodge Dakota
JOIN HERE


6/20/2002
22:07:47

RE: W00T!! Rancho 3" installed!!
IP: Logged

Message:
Well poo, Have you heard anything about putting a 33x12-13.50 on a 8" rim? Would it wear funny? i know i've seen some big meats on a skinny rim b4 but, it looks kinda funny. I'm open to all suggestions... Hey blizz... wanna get rid of your mickeys.. ;) i know somone who will take them off your hands for nothing.. lol



Blizzard
*GenIII*
 User Profile


6/21/2002
08:31:25

RE: W00T!! Rancho 3" installed!!
IP: Logged

Message:
I've not heard of 13.50's on an 8" wheel before ... might be a little wide. Dunno though, it might work.

I'll make you a real good deal on the Mickeys if you want them, hop!!! ;o)

'01 QC 4x4
5.9L, 3.92 LSD, loaded
shakin-notstirred.tripod.com

Hawkeye
*GenIII*
 Email User Profile


6/21/2002
08:33:23

RE: W00T!! Rancho 3" installed!!
IP: Logged

Message:
Last I checked, 12.50's fit on 8 inch rims fine. I'll have to look around though and see if I can find anyone around these parts running them.



yup
Dodge Dakota
JOIN HERE


6/21/2002
17:32:10

RE: W00T!! Rancho 3" installed!!
IP: Logged

Message:
too wide



ian1872
Dodge Dakota
JOIN HERE


6/21/2002
18:04:41

RE: W00T!! Rancho 3" installed!!
IP: Logged

Message:
i hate to say it but your truck still doesn't look very tall. if i were you and wanted 33's to fit i would put on a body lift too.

ian



McCracken
Dodge Dakota
JOIN HERE


6/21/2002
18:32:17

RE: W00T!! Rancho 3" installed!!
IP: Logged

Message:
It's hard to get a good perspective when the photographer kneels or crouches down like he's doing. I never look at my truck from that low down. I know he's trying to make the truck look taller but but photos from that angle look like crap IMO. I think the truck would look pretty good though. Will look even better when you crank the torsion bars a little. I can't wait for the the 2000+ kit to come out.



SuperBee
Dodge Dakota
JOIN HERE


6/21/2002
23:17:48

RE: W00T!! Rancho 3" installed!!
IP: Logged

Message:
now jsut go with a 3" body lift and it will look better yet



saffron
Dodge Dakota
JOIN HERE
 Email

6/23/2002
01:49:43

RE: W00T!! Rancho 3" installed!!
IP: Logged

Message:
how much did you pay for the lift without labor?



Dakota
GenIII
 Email User Profile


6/24/2002
17:32:56

RE: W00T!! Rancho 3" installed!!
IP: Logged

Message:
33x12.5 WILL fit on an 8" Rim.

Im running them...in all kinds of Terrain..and no complaints. Ive aired them down pretty good too with no worrys on them becoming un-beaded.

(33x12.5x15 Super Swamper Thornbirds on 15x8 Eagle 589 Rims)

-Dakota
3" Body Lift
Quick D Intake
Dynomax Race Magnum Exhaust
33x12.5x15 Super Swamper Thornbirds
Dakota.4mg.com

Tx-Hop
Dodge Dakota
JOIN HERE


6/24/2002
18:48:12

RE: W00T!! Rancho 3" installed!!
IP: Logged

Message:
Well, I took the truck out to South Padre Island this weekend. It was great, with the new shocks and all the balljoints replaced the truck handled great. My only complaint is the stock bumper. My brother was out there in his 98 ram 1500 2wd w/ a 360 and he got stuck.. Well, i have a POS rope in the back about 1/2-3/4" in dia. I wraped one end around the front sway bar on his truck and the other on the ball that was attached to my stock bumper.. well.. i gave it a good tug and now the ball on my bumper is pointing straight back.. not good.. looks like i'll need to buy a new bumper.. Sad part is my bro's truck had no damage and it taco'd my bumper.. I did get him out though.. i guess he owes me a bumper.. LMAO!



born2steel21
GenIII
 Email User Profile


6/25/2002
01:31:28

RE: W00T!! Rancho 3" installed!!
IP: Logged

Message:
hey...I got a blue/black stock bumper I'll sell you cheap...$20 plus shipping...its got a small dent that can easily be bondo'd up...I was just lazy about it so I bought a new one...if you want a new replacement they usually have some good deals on e-bay

-- Death Before Dismount --

Hawkeye
*GenIII*
 Email User Profile


6/25/2002
08:31:14

RE: W00T!! Rancho 3" installed!!
IP: Logged

Message:
I dont know Dakota. I've only been running 33's on 8's for 11 years. I'm still not sure if it will work. Have to give it a few more years and see.



Tx-Hop
Dodge Dakota
JOIN HERE


6/25/2002
09:30:23

RE: W00T!! Rancho 3" installed!!
IP: Logged

Message:
Blizz: What kinda deal?? shipping?? lol

Hawk: thanks, LMK

Ian: i'm running 32x11.50's on it now that is why it loks like it does. The torsion bars are getting tweaked this weekend. I can say that it rides really good like it is..

McCracken: This Pic i'm not kneeling.. http://glen.dodgedakotas.com/hop/After_Lift_Long_Shot.jpg And the T-bars are about 1" low in the front...


Superbee: I don't want a 3" body lift.. If i get a brush gaurd or anything it will look like crap..IMHO.. All your acc's stay on the frame while the body moves up..

Saffron: for the kit by it's self i'm not sure.. i just gave the guy $1,800 US to do the whole lift, Labor included. It cost me more than that in new parts, they didn't charge me any labor to put new stuff on inplace of the old.


Dakota: You tires look great.. How are they on the road? i do 6-10 hour road trips all the time.. The Pierellies i have on there now are super quiet on the road and handle well in the sand..

Born2steel: I have a SLT so i need a chrome one.. I've found a place here that does refurbished bumpers.. My front i got for 180 when i bent it.. i'm thinking about going with a ranch hand..






Carl Vick
Dodge Dakota
JOIN HERE
 Email

6/27/2002
03:32:19

RE: W00T!! Rancho 3" installed!!
IP: Logged

Message:
hey born id be intrested in that bumper did the same thing he did but was pulling out a 4x4 ram out of a sand pit know i know its the driver not the truck lol



Tx-Hop
Dodge Dakota
JOIN HERE


6/28/2002
10:45:52

RE: W00T!! Rancho 3" installed!!
IP: Logged

Message:
It's not the driver.. it's those POS bumpers that Dodge calls bumpers.. Why put a place for a ball if the tounge load is only good for 200#'s?? I've pulled stuff w/ it b4 and had no problems. I was even using a pos rope that wasn't much bigger than my dogs leash.. =/ Oh well.. live and learn..



born2steel21
GenIII
 Email User Profile


6/28/2002
18:07:56

RE: W00T!! Rancho 3" installed!!
IP: Logged

Message:
Hey Carl, e-mail me at born2steel21@yahoo.com about the bumper.

-- Death Before Dismount --

   P 1


Post a reply to this message:

Username Registration: Optional
All visitors are allowed to post messages


Name:
Email:
Notify me when I get a reply to my message:Yes  No

Icons:            

          

Subject:
Message:
 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.