| From | Message |
papa smurf
Dodge Dakota
JOIN HERE
5/04/2002
23:58:40
|
 Subject: TIE RODS WITH 5.5" INSTALL
IP: Logged
Message:
I FINISHED WITH THE TUFF COUNTRY LIFT INSTALL IN THE FRONT WITH THE EXCEPTION OF THE TIE RODS. I CANNOT GET THE CASTLE NUTS TO TIGHTEN DOWN ON THE TIE ROD. THE SPINDLE (OR I GUESS YOU CAN CALL IT A BOLT) JUST SPINS AFTER YOU GET PAST HAND TIGHTENING THE BOLT. ANY TIPS WILL BE TAKEN. ALSO THE PITMAN ARM'S CASTLE NUT WONT TIGHTEN DOWN EITHER, IT DOES THE SAME. I THINK IT MIGHT JUST NEED A DIE TO RE-THREAD IT BUT I DON'T KNOW. WELL I AM GOING TO START THE BACK TOMORROW AND WAIT FOR ANY RESPONSES. THANK YOU
|
Knobbyman
*GenIII*
5/05/2002
10:22:47
|  RE: TIE RODS WITH 5.5
IP: Logged
Message:
Make sure you didn't strip it... That's what it sounds like to me.
'01 Graphite QC 4x4
4.7 3.55 LSD
http://www.knobbyman.com
----Speed only breaks stuff faster----
|
smurfs up
Dodge Dakota
JOIN HERE
5/05/2002
10:38:07
| RE: TIE RODS WITH 5.5
IP: Logged
Message:
yup
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
