| From | Message |
Jon H.
Dodge Dakota
JOIN HERE
4/17/2002
01:06:20
|
 Subject: lifts for 4x2's
IP: Logged
Message:
I have a 01 4.7 2WD auto with the 3.55 gears, does anyone make a suspension lift for this truck? I heard that the fabtech for the 2000 wasn't compatible with my truck. Is that incorrect? Does anyone else make at least a 3" suspension lift for a 2wd? Thanks for any help.
|
Traumer
Dodge Dakota
JOIN HERE
4/17/2002
01:48:11
|  RE: lifts for 4x2's
IP: Logged
Message:
Some friendly advice to hopefully minimize some of the flames you are setting yourself up for. Look around at least a LITTLE before you post that question... There is a ton of info on this subject, including the Tall Quad's Lifted 2WD post right below yours (at the time of your post) And yes, this was easier to type than trying to summarize hundreds of posts on the subject....
|
Jon H.
Dodge Dakota
JOIN HERE
4/17/2002
16:17:37
| RE: lifts for 4x2's
IP: Logged
Message:
I did look around and I could not find an answer for if 3.55 gears were ok...I also couldn't find an answer for if the 2001 was compatible with the 3" fabtech...and I could not find an answer for if there were other companies that make 3" lifts for 2wd dakotas...thus the reason I posted...I always try to search first...Thanks for the help.
|
TallQuad
Dodge Dakota
JOIN HERE
4/17/2002
21:28:18
|  RE: lifts for 4x2's
IP: Logged
Message:
Nah... nothing will work on those 2001's, only 2002's. You should probably just leave it stock... ;-) hehe...
No really, Fabtech WILL work on your 01 (mine is 02).
Lots of poeple have 3.55's and run 33's... Hawkeye and plenty of others run that set-up just fine!
|
Jon H.
Dodge Dakota
JOIN HERE
4/18/2002
16:11:03
| RE: lifts for 4x2's
IP: Logged
Message:
Thank you very much!!!
|
Knobbyman
*GenIII*
4/21/2002
10:17:10
| RE: lifts for 4x2's
IP: Logged
Message:
Here ya go Jon ... I think this should answer your question about gear ratios
http://www.4wheelparts.com/tire_gear_ratio.asp
'01 Graphite QC 4x4
4.7 3.55 LSD
http://www.knobbyman.com
----Speed only breaks stuff faster----
|
Jon H.
Dodge Dakota
JOIN HERE
4/21/2002
11:19:02
| RE: lifts for 4x2's
IP: Logged
Message:
So basically I wouldnt wasnt to go larger than 32". A 3" lift is the same as a stock 4x4 right? What sive tires come on a stock 4x4 dakota?
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
