Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
09:34:51 - 03/28/2024

Raised / Lifted Dakotas
FromMessage
Ken
Dodge Dakota
JOIN HERE
 Email

9/01/2005
23:27:46

Subject: What lift to get?
IP: Logged

Message:
New with the Dakotas. I know how to lift the back. But I don't know how to lift the front indepedent suspension. It's a 4X4, if it makes a difference.



Adam
Dodge Dakota
JOIN HERE
 Email

9/02/2005
16:12:08

RE: What lift to get?
IP: Logged

Message:
It does because the 2wd have a coil front suspension and the 4x4 have Torsion Bars. How much lift are you looking for? You can go a couple inches by messing with your T-Bars. Wouldn't want to go further than a couple inches though. By using them to lift it could change your alignment and will make your ride a little stiffer. Also puts stress on other parts of your suspension.



Ken
Dodge Dakota
JOIN HERE
 Email

9/02/2005
19:27:19

RE: What lift to get?
IP: Logged

Message:
I'm not looking for much of a lift. Just mainly looking at raising the front to get it up like the rear.
Did you raise yours this way? if you did, did you need an alignment?



Adam
Dodge Dakota
JOIN HERE
 Email

9/02/2005
23:03:47

RE: What lift to get?
IP: Logged

Message:
Yea that's what I did. Doesn't cost anything but a little time. I probably should get an alignment but I didn't. I've only got a couple thousand miles on my tires right now so I don't know how they're wearing. I'm having no problems though.



EMTSquad51
Dodge Dakota
JOIN HERE
 Email

9/16/2005
00:34:15

RE: What lift to get?
IP: Logged

Message:
How do you lift your truck with the torsion bars???? (Keep in mind I know NOTHING about IFS)



LookHere
Dodge Dakota
JOIN HERE


9/16/2005
16:17:46

RE: What lift to get?
IP: Logged

Message:
http://www.walt-n-ingrid.com/modifications.html



Ken
Dodge Dakota
JOIN HERE
 Email

9/16/2005
18:46:54

RE: What lift to get?
IP: Logged

Message:
lifted mine last week using the torsion bars. Have to be careful though EMTSquad51, make sure you lift both sides the same, or you'll have a crooked front end. i think I got about 1 inch out of it, but I didn't raise it much, I didn't want to wear anything out. Don't have the $ to replace anything right now.



EMTSquad51
Dodge Dakota
JOIN HERE
 Email

9/19/2005
13:30:53

RE: What lift to get?
IP: Logged

Message:
Is this safe to do a lift this way? I'm only wanting to go about 2" frame and maybe 2" body lift, but want it to be safe as my family rides in this truck often.



Ken
Dodge Dakota
JOIN HERE
 Email

9/19/2005
18:51:47

RE: What lift to get?
IP: Logged

Message:
I would think that if you didn't take it off road alot, then you'd be ok. If you take it off road though, I would take it much above 1.5 inches...just my opinion.

Ken



Miles
Dodge Dakota
JOIN HERE
 Email

9/20/2005
19:26:29

Which tires will fit
IP: Logged

Message:
If I raise my stock dakota by cranking the torsion bar in the front and putting blocks under the leaf springs in the back how big of tires do you think I should get? 32's?



Ken
Dodge Dakota
JOIN HERE
 Email

9/20/2005
19:35:29

RE: What lift to get?
IP: Logged

Message:
Well, Miles, in my opinion, I think if you raise the back like you were talking about, it's not going to level with the front. It will probably be lower in the front b/c those torsion will only give you 2" of lift at the MOST.

I would probably get 32s, I'm pretty sure they would fit on the front. But if you want to try it, get 33s.



Mac
Dodge Dakota
JOIN HERE
 Email

9/24/2005
17:38:29

RE: What lift to get?
IP: Logged

Message:
Do you guys know if 32s fit on our dakota's stock? I have a 97 with 31s on it right now but it seems like there is alot of space left even with the 31s..but id hate to get 32s and have a tone of rubbing.
Just curious if anyone knows.
Thanks,
Mac



4x4x4dr
GenIII
 Email User Profile


9/28/2005
14:28:37

RE: What lift to get?
IP: Logged

Message:
Miles, 33s will not fit without a 3" body lift. I'm not sure if 32s will fit with only cranked torsion bars. I tried Toyo AT 32s on mine without cranking the torsion bars and they rubbed bad.

~Tracy
'00 4x4 SLT QC 4.7 Auto Mods Pics

Frank D.
Dodge Dakota
JOIN HERE


9/30/2005
00:04:54

RE: What lift to get?
IP: Logged

Message:
I would go with Max 32's with only the T-bars cranked. I had 31's on mine before I had the lift and I could get the tires to rub if I was really twisted up under full lock.



Bucket
Dodge Dakota
JOIN HERE


9/30/2005
14:16:48

RE: What lift to get?
IP: Logged

Message:
I agree with Frank,32 max without suspension lift i got 32 with body lift of 3" and they rubbed real bad,although mines a 94 and i got 3.5 backspace on rims,



Adam
Dodge Dakota
JOIN HERE
 Email

9/30/2005
14:48:13

RE: What lift to get?
IP: Logged

Message:
I've had my 32's on for a while now and I haven't had any rubbing at all. Even with out my BL I didn't rub but I hadn't gone offroad either but at full turn no rubbing (1/4" space left). Another thing is, is that some tires may say they're the same size but really one can be bigger than the other. Lookin to get 33's in the distant future, maybe after suspension lift and maybe not depends on what happens.



Bucket
Dodge Dakota
JOIN HERE


9/30/2005
18:04:35

RE: What lift to get?
IP: Logged

Message:
Well thats true i have heard that some 32 are not only the same size as some 33 but actually can be bigger than a 33 depending on tread pattern,my problem was the 3.5 backspacing on the rims and the mud tread on the superswamper ssr radials was insane,i got so much rubbing it was undrivable with those tires until i got the suspension lift done,now its perfect.



   P 1


Post a reply to this message:

Username Registration: Optional
All visitors are allowed to post messages


Name:
Email:
Notify me when I get a reply to my message:Yes  No

Icons:            

          

Subject:
Message:
 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.