| From | Message |
Critter
Dodge Dakota
JOIN HERE
7/06/2004
14:15:50
|
 Subject: 3 Body Lift 32s
IP: Logged
Message:
Check it out!!! I just did my first 3 inches of lift on my 2wd dak. I put the 32's on, lots of rubbing, had to trim now there isn't much at all. Pictures are up at http://www.cardomain.com/memberpage/604775
Check it out and tell me what you think. Better pics later, I am short for time.
|
sixlugs
Dodge Dakota
JOIN HERE
7/06/2004
15:30:39
|  RE: 3 Body Lift 32s
IP: Logged
Message:
hey that looks really good!
who makes the lift u chose to go with?
how did u make the home made cold air intake (like what were ur specs)... i have an airaide now... but if i do the body lift it wont work... properly, so i need to think of any alternative. besides that, it really looks tight!
|
A.j.
Dodge Dakota
JOIN HERE
7/06/2004
22:39:16
| RE: 3 Body Lift 32s
IP: Logged
Message:
Hey man lookin good...keep it up. If I may ask what size rims are on there and where did it rub?
|
Critter
Dodge Dakota
JOIN HERE
7/06/2004
23:15:43
| RE: 3 Body Lift 32s
IP: Logged
Message:
Performance Accessories does the lift. Specs for the intake are 3in ABS pipe 7 or so inches long, a 45 Degree bend, Fernco Coupler, and a 6x9 K&N airfilter.
The tires and rims... yeah that is tough. Ok, first they are 32x11.5 on 15" rims with a 3.25 back spacing. Tire rub was really bad on the front so I trimmed the front valence and the plastic well gaurd. On the back they rub not very much, trimmed plastic back there too. Also bent in the body material as far as possible. It rubs only in parking lots. The tires are noisey, but I don't care, keeps me awake.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
