| From | Message |
Lee
Dodge Dakota
JOIN HERE
6/15/2004
00:48:23
|
 Subject: 4x4 suspension on a 4x2
IP: Logged
Message:
What is the difference suspension-wise between a 4x2 quad cab and a 4x4 quad cab to give the 4x4 the extra ride height and the firmer ride? I have no use for a 4x4 but I like the ride better so I was wondering if it would be a direct parts swapout to give it the ride height. I don't need (or want) a body lift or anything, I just want to give a 4x2 the same ride and ride height as a factory 4x4. Thanks.
|
conig
Dodge Dakota
JOIN HERE
6/15/2004
16:09:28
| RE: 4x4 suspension on a 4x2
IP: Logged
Message:
i looked for a previous post I had put up on the same subject but can't seem to find it.
the whole front suspension is different. meaning upper and lower control arms. I beleive ball jopints and then torsion bars. Its not really worth it.
the fabtech 3 inch will get you to the height of a stock 4x4 but you need new wheels. a 1.5 inch spacer(2.25 front lift) will get you pretty close as well. I know you said you wern't interested in lifts but its much more practical.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
