Forums
Forum Tools
|
 |
07:47:54 - 04/19/2024
Raised / Lifted Dakotas
| From | Message |
Scott
Dodge Dakota
JOIN HERE
2/22/2004
19:08:50
|
 Subject: Rear Axel on Dak\Rango?
IP: Logged
Message:
Hello, I have a 2000 4x4 durango with a 360ci in it. Im currently runnning some wimppy ass p235's on it but soo plan on buying either some 31's or 32x11.5's.
My question is, I thought the 4x4 was sospouse to have the reart axel under the leafs, but mine is on-top of the leafs, is that right, and if there is is there a flip kit for it?
When i sold my ram 1500 i took off my 2" blocks and U bolds form the back planing on useing them on my rango, as i thought it was the same setup.
Also on another note, (dont want to start a new tread over this) When im sitting on level ground, the front lower bumpstops are about a 10th of and inch from the lower control arm is this right, or has my torsion bars slipe lower? I notice alot of 4x4 rangos stock look higher that mine in the front... thanks for the help.
|
Scott
Dodge Dakota
JOIN HERE
2/24/2004
01:41:25
|  RE: Rear Axel on Dak\Rango?
IP: Logged
Message:
no one?
|
boggerdak
Dodge Dakota
JOIN HERE
2/24/2004
22:24:17
| RE: Rear Axel on Dak\Rango?
IP: Logged
Message:
The axle set-up on your Durango is correct. I couldn't tell you why it is different than the way 4x4 Dakotas are set-up, though. I do know that spring under set-ups have less axle wrap than spring over, but I doubt that is the reason they made the Durango that way.
Maybe try cranking up the torsion bars and see if that helps with the front.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
|
