| From | Message |
Frank N.
Dodge Dakota
JOIN HERE
2/22/2004
14:05:58
|
 Subject: 2wd lifts
IP: Logged
Message:
Where can i purchase Fabtechs 3 inch suspension lift for the lowest price. and also the perofrmance accesories body lift.. thank you
|
Trent Plemons
Dodge Dakota
JOIN HERE
3/04/2004
22:00:00
|  RE: 2wd lifts
IP: Logged
Message:
frank n. I have been shopping around and i found the Fabtech 3'' suspension lift at www.performancelifts.com for $609.00 and i believe it is free ground shipping. there is a set back though it doesnt include shocks. i am going to order mine there for my 2wd 97 dakota.
that is the cheapest so far.
|
new to lift
Dodge Dakota
JOIN HERE
3/07/2004
03:21:50
| RE: 2wd lifts
IP: Logged
Message:
is 3 inch the biggest you can go on a 2wd dak? I was hoping for 6, so i can do a body lift and get 9 inches....we all want 9 inches.
|
new to lift
Dodge Dakota
JOIN HERE
3/09/2004
02:44:12
| RE: 2wd lifts
IP: Logged
Message:
Wtf does nobody know????
|
DakUSA
DakotaEnthusiast
3/09/2004
08:38:15
| RE: 2wd lifts
IP: Logged
Message:
I sell the fabtech with free shipping and shocks.
825.99 includes shippign and shocks
Chris Lambert
Dakota USA
01 Graphite QC -- 4.7 Auto, Hotchkis, GTS Functional RamAir Hood, F&B 70mm TB, SpinTech True Dual Exhaust, Bed Rug, Leer 700, 18X9 Alt Wheels, SS Grilles, SS Bumper, Custon Leather seats, NR Auto gauges, Kenwood CD, 350 amp, JL 10" sub in console, DVD, Billit AC knobs
|
dakotaaggie06
Dodge Dakota
JOIN HERE
3/10/2004
00:08:34
| RE: 2wd lifts
IP: Logged
Message:
What do you charge for the PA 3" body lift, the fabtech add-a-leafs, and fabtech 2" coils? On these items is shipping free also?
|
new to lift
Dodge Dakota
JOIN HERE
3/12/2004
12:04:40
| RE: 2wd lifts
IP: Logged
Message:
Who gives a flying fu[k? How big of a lift can I get? You guys are no help, the lowrider guys would have been all over this one. maybe I'll just drop it!
|
Frank N.
Dodge Dakota
JOIN HERE
3/12/2004
16:05:17
| RE: 2wd lifts
IP: Logged
Message:
u can get 6 inches of lift, 3 from suspension, 3 from body, and another 2 to even out the front with coil spacers, and .. .with that u can run 33's which can give u another 3 inches if u were runnign stock 27 inch tires
|
new to lift
Dodge Dakota
JOIN HERE
3/13/2004
03:36:13
| RE: 2wd lifts
IP: Logged
Message:
Thank you! At least somebody here knows what to tell someone!
|
rivermaniac
Dodge Dakota
JOIN HERE
3/13/2004
18:00:50
| RE: 2wd lifts
IP: Logged
Message:
you could only get 6" of lift 3from fabtech and 3 from the body lift , do a search , there's a lot on this .............you can't run a coil spacer . Again were gonna argue but if you say you can then go for it ..............
|
DakUSA
DakotaEnthusiast
3/16/2004
10:57:14
| RE: 2wd lifts
IP: Logged
Message:
Also be warned that you can not run stock rims with the fabtech kit without a spacer. you can only run a min 3.5 back spacing with the fabtech. ALso the body lift is 200.00 shipped with the fabtech kit
Chris Lambert
Dakota USA
01 Graphite QC -- 4.7 Auto, Hotchkis, GTS Functional RamAir Hood, F&B 70mm TB, SpinTech True Dual Exhaust, Bed Rug, Leer 700, 18X9 Alt Wheels, SS Grilles, SS Bumper, Custon Leather seats, NR Auto gauges, Kenwood CD, 350 amp, JL 10" sub in console, DVD, Billit AC knobs
|
Lenny
Dodge Dakota
JOIN HERE
3/16/2004
12:41:44
| RE: 2wd lifts
IP: Logged
Message:
I just bought the 3" lift from fabtech off of performancelifts.com. I already have aftermarket rims, so I didnt need the spacer. The total was $792 with shocks and shipping. After I get this in, I'm saving up for the 3" body lift.
I looked and looked for a 6" suspension lift but couldnt find one for the dakotas.
Does anyone know if the installation of this lift is difficult? How long should it take?
|
Lenny
Dodge Dakota
JOIN HERE
3/29/2004
09:42:20
| RE: 2wd lifts
IP: Logged
Message:
Well I just started putting together the lift. I got the pass front done. and It only took me a day and a half. I was held up when I tried installing the new spring. I couldnt find a coil spring compressor till sunday afternoon. other than that, it all went together pretty easy. There is a gap between the urethan bushing and the cross-shaft the ties the the upper control arm to the frame. I doesnt look right but everything fits right. I'm going to call Fabtech to make sure that this is correct.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
