| From | Message |
Kyle
Dodge Dakota
JOIN HERE
1/25/2002
09:58:15
|
 Subject: lifting question
IP: Logged
Message:
hey i went to just 2x4 lift.com and they can lift
the spindles 3 inches and a suspension lift is
3 inches and a three inch body with an axle flip
would get close to 9 inches of lift. would that
mess with the steering i dont think it would but
i would like some input from you guys. also if
it is possible, how big of tires do you think i
could fit
|
TallQuad
Dodge Dakota
JOIN HERE
1/25/2002
14:05:02
|  RE: lifting question
IP: Logged
Message:
Well... that's the on-going debate! Spindles are all that is keeping us 2wheel drive guys from going another 3" in height. Unfortunitly, nobody has developed them (yet). An axle flip will work great but gives you about 4" of lift, not 3". No biggie, just some info to consider.
|
Joe E.
Dodge Dakota
JOIN HERE
1/25/2002
16:12:33
| RE: lifting question
IP: Logged
Message:
OK, I just had a discussion on this board about spindles. I was always under the assumption that you could add 3in lift spindles to your Dak and not have any change in the Rack and Pinion steering. But lately, people have said that the spindles move the R&P 3in just like suspension lifts. I had the same idea as Kyle to go with a 3in body, 3in susp., and 3in spindle to get 9in os lift. But I also dont know if it would work. Someone with a tech brain, get on this quick. We all need this one answered.
Thanks.
Joe E.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
