Forums
Forum Tools
|
 |
07:40:35 - 04/26/2024
Raised / Lifted Dakotas
| From | Message |
Wildman
Dodge Dakota
JOIN HERE
8/01/2003
17:40:27
|
 Subject: What about this 2wd lift setup?
IP: Logged
Message:
97 2wd v6 dakota
Ok this is what I was thinking of doing 3in body lift, 2in coil spacers, fabtech 2in lift coils, fabtech add-a-leaf, and 33in tires. So that would be 7in in the front and 5in back, I think, I am not real sure about how to lift the back to look good. What do you think, will this work, and how much would I have to trim the fenders?
|
cteagan
Dodge Dakota
JOIN HERE
8/01/2003
20:41:48
|  RE: What about this 2wd lift setup?
IP: Logged
Message:
That wouldn't work! You can only lift the front suspendion 2" total without replacing the upper arms. So you could lift the suspension 2" with the Fabtech coils, or the coil spacers. Unless you want to replace the upper arms and the wheels, because then you could go as high a 3". But then you still have the body lift option, 3" along with a 2" or 3" suspension lift. But with the 3" Fabtech lift and the body lift you will be able to clear 33's.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
|
