| From | Message |
gregschw
Dodge Dakota
JOIN HERE
1/10/2002
08:04:43
|
 Subject: question about lifts!
IP: Logged
Message:
hey, i have a 97 dodge dakota 2WD, right now its just stock height but i got a body lift kit for it, i want to put 33's on it though instead of 31's, whats the best and cheapest way to get it high enough?? i saw fabtech had a 2" basic system suspension lift, would that be high enough? thanks in advance!
|
Blizzard
*GenIII*
1/10/2002
08:10:46
|  RE: question about lifts!
IP: Logged
Message:
Nawwww ... you're gonna need that susp lift plus a body lift to run 33's on a 4x2. Do a little searching of the archives. There were several posts re: this subject. Should find what you need to know there.
Good luck!
'01 QC 4x4
5.9L, 3.92 LSD, loaded
http://shakin-notstirred.tripod.com
|
gregschw
Dodge Dakota
JOIN HERE
1/10/2002
11:48:31
| RE: question about lifts!
IP: Logged
Message:
ok thanx i'll make sure to check the archives... any 97 2wd people out there put 3 in. body and a 2 in. suspension lift on their truck and ran 33's? also how did it look?
|
TallQuad
Dodge Dakota
JOIN HERE
1/10/2002
15:18:21
| RE: question about lifts!
IP: Logged
Message:
You need both a 3" body AND 3" suspension lift, this is the only way (without anything custom).
http://members.home.net/ryanwesterman1/2002Dakota.htm
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
