Forums
Forum Tools
|
 |
14:55:54 - 04/26/2024
Raised / Lifted Dakotas
| From | Message |
rivermaniac
Dodge Dakota
12/18/2001
19:59:19
|
 Subject: " fabtech "
IP: Logged
Message:
Have good news for us 2 wheelers ....... Talked to fabtech and they are in the process of making a lift 6" for 2 wd trucks , will be the upper arms and spindle . Didn't forget you 4x4 guys , they said nop , no lift , said that tuff contry was making one and had trouble with the brakes not holding up , ?????? Also said it wasn't profitable for them to make a lift for one or two year model , that dodge keeps changing the suspension ........( some body alse said something similar on a post , think hawkeye ) Anyways waiting for the lift to come out , no eta time was given ................ Can you fit 285 75 16 on a 7" rim ??????? and thanks for all your info !!!!!!!Ohhhhhhh got told by three places , stay away from aim ..............No waranty on the parts ............I read somewhere that somebody was going to try the superlift "thing" for the computer ( for the speedo and shift gears on the trany ) How did that come out ???????? I can't wait to lift my truck , really like that guys scott , also hawkeye , tothextreme , great trucks !!!!!!!!!!!
|
Boomer
Dodge Dakota
12/18/2001
20:05:13
|  RE:
IP: Logged
Message:
Was that also for the GenII or just the III? My friend wants one very badly for his GenII.
Boomer
|
QUAD2NV
Dodge Dakota
12/19/2001
22:36:09
| RE:
IP: Logged
Message:
That sure is funny Fabtech mentions something about a lift spindle. I was at SEMA no less than a month and a half ago (much like many others reading this post) and spoke with the Design Engineer for new products, after showing him pics of my truck and speaking for almost 45 minutes, he stated that there were NO plans for a Dakota lift spindle. I'm sure nothing has changed in that amount of time. Where'd you get that info from Rivermaniac? Something that their own Engineers don't know about?
QUAD2NV
Lifted 2wd Dakota Quad Cab
www.QUAD2NV.com
|
rivermaniac
Dodge Dakota
12/20/2001
00:24:38
| RE: fabtech
IP: Logged
Message:
I called fabtech on the phone , I talked to somebody named ryan , I live out here in califonia ( la area ) and that's what I can tell you , if he lied to me or not , I can't tell you that either ...........
|
dkr8611
Dodge Dakota
12/20/2001
15:03:44
|  RE:
IP: Logged
Message:
***My Email to FABTECH:
Howdy,
I have a 2001 2WD Dodge Dakota Quad Cab 4.7 V8. I am very interested lifting it. I have seen other people install the 2000 model 3 inch performance lift on their 2001 or 2002 vehicle, but I would like a 6 inch lift. I heard that you were making a 6 inch lift (combination spindle, control arm). Is this true? If so, I would appreciate any info that you have. Also, if the 2000 lift is put on a 2001 vehicle do you support that?
***Their response:
SORRY we are not planning on building a spindle for that truck @ this time BryanVH
****My response:
I really do not like the way your company "shares" information. I asked two questions and received one answer. If you're not going to make a product according to demand, at least answer the questions about the products you do make.
Does the 2000 3" performance lift work on the later models also??
***Their response part two:
yes
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
|
