| From | Message |
RaGuS
Dodge Dakota
JOIN HERE
2/23/2003
20:58:06
|
 Subject: 88 Trailmaster Add a Leafs Mr Walt Help!
IP: Logged
Message:
Where can I buy these online?? They will put my back up 2 inches or so right?? And if I get V8 Torsion bars will I be able to crank the front up to level out the truck, I read this on Walts website and he said he put V8 Torsion bars to crank for an additinal Lift.....Walt let me know whats up....You are the Gen 1 god haha
|
RaGuS
Dodge Dakota
JOIN HERE
2/24/2003
22:09:56
| RE: 88 Trailmaster Add a Leafs Mr Walt Help!
IP: Logged
Message:
SOMEONE@!!!!!!!!!!!!
|
SuperBee
Dodge Dakota
JOIN HERE
2/25/2003
03:43:19
| RE: 88 Trailmaster Add a Leafs Mr Walt Help!
IP: Logged
Message:
i went with the rough country from JC whitney
$36 shipped or something liek that
got about 1.75" out of them
you wont notice as much lift if you lift the back, measure, then crank up tostionbars
but i suggest lifting the tosion bars all the way up, then seeing how much you need, if you need more than the springs will give you you can stick a small block under the springs to take up what is left o your bolts and thast about as much lift as you can get without new bolts
|
RaGuS
Dodge Dakota
JOIN HERE
2/27/2003
20:17:25
| RE: 88 Trailmaster Add a Leafs Mr Walt Help!
IP: Logged
Message:
What about the V8 Torsion bar thing, anyone here anyone else do this besides walt?
|
SuperBee
Dodge Dakota
JOIN HERE
3/02/2003
18:25:46
| RE: 88 Trailmaster Add a Leafs Mr Walt Help!
IP: Logged
Message:
not me
|
Walt Felix
Dodge Dakota
JOIN HERE
3/12/2003
11:06:11
|  RE: 88 Trailmaster Add a Leafs Mr Walt Help!
IP: Logged
Message:
Sorry RaGuS, I've been really busy with a number of personal and work related projects. I've not been on the board for a while. Anyhow, I got mine from the dealer and don't know where you can buy those online. I would think that you could inquire to any site that sells OEM Dodge parts. The part numbers are:
Torsion Bar 2000 lb.8 cly
91-96R = 4322 518
91-96L = 4322 519
I, myself have been forced to start the first major Mod to my 96CC. The 8.25" rear is about to self-destruct for the second time in the 10 months. I was on the phone with DTS yesterday and have a Dana 60 coming for it. That should solve that problem once and for all! I have them building it with a 5 on 5.5” bolt pattern to match a Dana 44 from an early Bronco or F150. I would like to make that swap either later this year or next. The truck sits too low in the nose with the plow mounted.
I also have to figure out where the images below made off to when I moved my website to a new host. I just realized they’re not loading.
Walt Felix
Walt@Walt-n-Ingrid.COM
http://WWW.Walt-n-Ingrid.COM
http://WWW.MoparsinMotion.COM
http://WWW.CruiseNights.Info
   
|
