| From | Message |
Bill Hollis
Dodge Dakota
JOIN HERE
2/11/2003
19:22:03
|
 Subject: Gear Question
IP: Logged
Message:
What size gears do I need after I put on 35's BFG mud terrains? I was thinking 4.56 but is that to big? Also what is the performance difference b/t each size and the cost? Thanks
|
MD
Dodge Dakota
JOIN HERE
2/12/2003
00:21:56
| RE: Gear Question
IP: Logged
Message:
Go to Randy's Ring and Pinion website. You will find a program there that allows you to plug in numbers for tire size and gear ratio to come up with an RPM figure at a certain speed. Easy to use. Good luck. 4.56's with 35" of rubber sounds right.
MD
|
tj
Dodge Dakota
JOIN HERE
2/12/2003
10:23:48
| RE: Gear Question
IP: Logged
Message:
i started with 3.29 gears with 28 tires now i want to put on 33 would 3.55 work
|
tj
Dodge Dakota
JOIN HERE
2/12/2003
11:06:12
| RE: Gear Question
IP: Logged
Message:
look what i found http://www.tyres1.com/calculators.html
this will help anserw rotio questions
|
trevor
Dodge Dakota
JOIN HERE
2/25/2003
23:42:59
| RE: Gear Question
IP: Logged
Message:
hey tj dont do it cause most dakotas come stock with a 3.55 gear ratio and i thatought what you though i put 33's on and went with the stock 3.55s and now im paying for it ive rebuilt my tranny 3 times and got smart and got 4.11s and a limited slip so now i can cruise like 80 slam it and still hit 90 like nothing
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
