| From | Message |
6lizrd
Dodge Dakota
JOIN HERE
2/16/2004
20:49:42
|
 Subject: intakes
IP: Logged
Message:
are 5.2 and 5.9 intakes the same? how about '94 and a '98? can any work be done to a stock manifold? sorry for the naive ?'s.. thanks again
|
6lizrd
Dodge Dakota
JOIN HERE
2/17/2004
19:48:04
|  RE: intakes
IP: Logged
Message:
i could use some help here. would a 2000 5.9 intake work and/or be benifical to my '94 5.2? if not can anything be done to my stock intake ? just trying to save some money and promise to send dodge dak.com some $. i will be upgrading my TB and exhaust........thanks
|
yes
Dodge Dakota
JOIN HERE
2/17/2004
20:03:40
| RE: intakes
IP: Logged
Message:
The 2000 5.9 intake has no EGR and the 94 5.2 intake does. Other than that they are pretty much the same. You will eliminate the EGR by doing this. I'm not sure if the 94 PCM will adjust for no Exhaust gas recirculation. It should have no effect on the PCM. It would make sense that this would increase the HP by reducing the temperature of the intake manifold (no egr). As far as a bolting it on, there is nothing that won't interchange.
|
99dakota
Dodge Dakota
JOIN HERE
2/25/2004
09:13:38
| RE: intakes
IP: Logged
Message:
I have a intake from a 96 indy ram I started porting I have the runners cut down 1 3/4'-2" and started porting the runners the divider is also cut down it has egr I was going to block it off and use it. But I'm kinda losing interest and thinking of an m-1. I may sell it if I can get a deal on an m-1. I also have a felpro pleanum gasket. My pleanum gasket is toast though so I have to do something soon.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
