From | Message |
03 R/T Dodge Dakota JOIN HERE
12/20/2003 11:19:21
|
Subject: had bg flash done IP: Logged
Message: Just a question about how long(many miles) for the truck to accept the new fuel curve, shift points, etc...?
|
FLASH Dodge Dakota JOIN HERE
12/20/2003 12:42:29
| RE: had bg flash done IP: Logged
Message: with a flash it shouldn't take any, that's what has been done to the pcm
|
R/T Dodge Dakota JOIN HERE
12/20/2003 13:08:21
| RE: had bg flash done IP: Logged
Message: How does the truck feel? What other mods?
|
03 R/T Dodge Dakota JOIN HERE
12/20/2003 13:50:06
| RE: had bg flash done IP: Logged
Message: The truck is more responsive in the low end below 2500rpm's. I was told the flash would help b/c I have an M1 intake in addition to headers, exhaust, and a KN cold air. My friend told me the computer has to learn things like trottle postition, driving habits, shift points, etc add should take betwwen 50 and 300 miles to re-learn the program. I really haven't had a chance to jump on it yet and the track is closed until the spring.
|
03 R/T Dodge Dakota JOIN HERE
12/20/2003 14:06:53
| RE: had bg flash done IP: Logged
Message: The truck idles better also. It used to buck stopped in drive now the bucking is gone and idle is very smooth.
|
R/T Dodge Dakota JOIN HERE
12/20/2003 14:16:53
| RE: had bg flash done IP: Logged
Message: There isn't anything to relearn. By getting the pcm flashed with a new program everything thing is programmed in so it doesn't have to learn. Only time the pcm has to relearn things is when you do other mods like exhaust, 1.7 roller rockers, TB, M1. Things like that have nothing to do with the pcm so the pcm then has to learn them. It's hard to explain but I hope this helps.
|
03 R/T Dodge Dakota JOIN HERE
12/20/2003 15:57:23
| RE: had bg flash done IP: Logged
Message: R/T I guess I understand. DId you have a flash done? Maybe if a get a bigger throttle body I'm still running the stock one. There is a definate differance to the truck. I guess the money was spent wisely rather than getting a programmer?
|
UNTILL Dodge Dakota JOIN HERE
12/20/2003 16:37:55
| RE: had bg flash done IP: Logged
Message: UNTILL you have to go to the dealer and they RE-flash your $$$ program out the door then you'll wish you had got the programer !!!!
|
03 R/T Dodge Dakota JOIN HERE
12/20/2003 17:18:48
| RE: had bg flash done IP: Logged
Message: Which dealership do you go too mine was pretty cool. They saw the M-1, intake and exhaust and just honored everthing. Maybe you should try other dealerships?
|
R/T Dodge Dakota JOIN HERE
12/20/2003 17:19:13
| RE: had bg flash done IP: Logged
Message: 03R/T
You did the right thing by getting the B&G. Don't listen to these other guys. It is hands down the best option we have for the 01 and newer R/Ts.
I run a 13.50 in the 1/4 with these mods
02 club cab R/T
B&G M1 flash
K&N FIPK
52mm F&B TB
M1 intake
Mopar headers
Custom y-pipe w/ single 3.5" exhaust,no cats
Taylor wires
Crane ignition
MSD coil
4.56 gears
Transgo shift kit
1.7 HS roller rockers
28" MT et slicks
|
R/T Dodge Dakota JOIN HERE
12/20/2003 17:23:04
| RE: had bg flash done IP: Logged
Message: If you take the truck in for work just tell them DO NOT TOUCH THE PCM. Or you can label it DO NOT TOUCH. Since your guys are cool with the mods just tell them what you got and not to overwrite it.
|
03 R/T Dodge Dakota JOIN HERE
12/20/2003 17:30:16
| RE: had bg flash done IP: Logged
Message: R/T where or who made the y=pipe for you. I bought a pair of JBA shorties want to go with a bigger y-pipe.
|
R/T Dodge Dakota JOIN HERE
12/20/2003 17:44:59
| RE: had bg flash done IP: Logged
Message: local shop
|
big_torque Dodge Dakota JOIN HERE
12/20/2003 18:28:09
| RE: had bg flash done IP: Logged
Message: Anybody have the B&G flash with 2.02 heads and cam combo ?
|
| P 1 |
|
Post a reply to this message:
Username Registration: Optional All visitors are allowed to post messages
|