| From | Message |
mfcp1
Dodge Dakota
JOIN HERE
7/30/2003
16:23:23
|
 Subject: How do you set to TDC?? 4.7L
IP: Logged
Message:
How do I set the cams back to TDC?? No I didn't paint the cams before removal. I used a black marker not being smart enough to know it would rub off!!!
|
TexasTodd
Dodge Dakota
JOIN HERE
8/03/2003
07:35:46
| RE: How do you set to TDC?? 4.7L
IP: Logged
Message:
When the marks are lined up, it's at TDC, the cams will only go in one way, they have a pin in them for the sprocket. Hope that helps
|
Kowalski
Dodge Dakota
JOIN HERE
8/03/2003
09:04:57
| RE: How do you set to TDC?? 4.7L
IP: Logged
Message:
Actually Todd, at least one cam may go in more than one way, that might have something to do with the problem this guy is having. I suspect though that it might have more to do with a distubed timing chain, that is why he is trying to re-index from scratch.
|
NEWGUY
Dodge Dakota
JOIN HERE
8/03/2003
09:30:31
|  RE: How do you set to TDC?? 4.7L
IP: Logged
Message:
Just bought a 2001 Dakota with the 4.7. Happy Guy with new toy! ! ! Whats some good web site for performance parts?
|
Chipster
Dodge Dakota
JOIN HERE
8/04/2003
11:33:05
| RE: How do you set to TDC?? 4.7L
IP: Logged
Message:
When the mark on the crank dampener is
lined up with the mark. You are either at top
dead center or bottom dead center. Top dead
center is when the crank is lined up and the
V8 symbols on the cam sprokets are BOTH
horizontal. (V8) (V8)
|
mia pron khal
Dodge Dakota
JOIN HERE
12/20/2018
15:41:13
| UfPhJbooMgosva
IP: Logged
Message:
iu9U88 Unfortunately, fanminds did not present at the GSummit, so their slides are not included. I\ ad love to hear more about their projects. Please get in touch! Jeff at gamification dot co
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
