| From | Message |
Rod
Dodge Dakota
JOIN HERE
7/13/2003
01:16:45
|
 Subject: My truck is slower
IP: Logged
Message:
I have a 318 5 speed reg cab 97 dakota. I ran a 15.6 (in FL) with an intake, no muffler, and new tires. I added a crane custom grind camshaft with 520 and 531 lift (I think, I have to check my cam spec sheet) a 160 degree thermo, mopar PCM, and new intake gaskets. I ran a 16.4,16.1, and a 16.4. I really hope that the problem is that I don't have enough air flow to keep the cam happy. any help is appreciated. I probably need a head job or new heads, and an M-1. hopefully That'll help
|
dcxer
Dodge Dakota
JOIN HERE
7/14/2003
00:38:57
| RE: My truck is slower
IP: Logged
Message:
I hope that you installed the matching valve springs with that camshaft.That much lift should put the stock springs into coil bind or very close.Also the rockers will need an update with that kind of lift.Exh sys mods (Headers and free flowing exh sys)also needed for the whole package to work.(probably should have been the first mod).Rear end gear change next.What int are you using? What TB are you using? What rear end gearing are you running?
|
huy
Dodge Dakota
JOIN HERE
7/14/2003
03:14:30
| RE: My truck is slower
IP: Logged
Message:
i have the same exact truck with a m1, kn fipk, mopar pcm, msd parts and can break into the mid 14s no problem.
|
Rod
Dodge Dakota
JOIN HERE
7/14/2003
20:18:23
| RE: My truck is slower
IP: Logged
Message:
Im going to get some dual springs and the same size rockers. I have 3.92's and 4.56's are next when I get the supercharger. Stock TB, Im getting a 52mm. I have no muffler but Im getting a high flow cat, or strait pipe. headers are next in line.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
