| From | Message |
McyMike
Dodge Dakota
JOIN HERE
6/14/2003
09:03:56
|
 Subject: 4.7 Cam simple ??
IP: Logged
Message:
Are the HO cams for the 4.7 different lengths??? I ordered mine from Mopar.com and they both came unpackaged and both are exactly alike. I thought I saw in previous forums where one is supposed to be longer than the other. Help please before the truck is torn down.
Mike
|
chesster51
Dodge Dakota
JOIN HERE
6/14/2003
10:01:38
|  RE: 4.7 Cam simple ??
IP: Logged
Message:
They are the same length.
|
stop
Dodge Dakota
JOIN HERE
6/14/2003
12:31:07
| RE: 4.7 Cam simple ??
IP: Logged
Message:
No they are not the same length, one of yours is wrong.
|
Demon Dakota
DakotaEnthusiast
 
6/14/2003
15:07:34
| RE: 4.7 Cam simple ??
IP: Logged
Message:
IIRC, the left one is the longer one...
They are of unequal length...
K&N Drop in AF (CAI during summer months)
True Dual exhaust and removed third cat
HO Cams & HO Intake
FASTMAN 70mm TB
Autolite 3923 Plugs
TPS @ .76 VDC
IAT Adjuster Mod
14.52@94.2 MPH at Silver Dollar Raceway
|
slow2dak
Dodge Dakota
JOIN HERE
6/14/2003
21:38:33
|  RE: 4.7 Cam simple ??
IP: Logged
Message:
actually the right bank cylinder head holds the longer of the two cams. the right bank cam has the provisions on it for the CMP.
|
Kowalski
Dodge Dakota
JOIN HERE
6/15/2003
08:27:22
| RE: 4.7 Cam simple ??
IP: Logged
Message:
One is 19 1/2", the other is 18 1/4".
|
McyMike
Dodge Dakota
JOIN HERE
6/15/2003
11:20:24
| RE: 4.7 Cam simple ??
IP: Logged
Message:
Guys thanks. If it wasn't for the for the Forum, the truck would have been in pieces 30 miles from the house. Be careful with BUYMOPAR.com. I specifically asked them about the cams and the guy told "not to worry" they ship these every day.
Thanks again!!
|
Kowalski
Dodge Dakota
JOIN HERE
6/15/2003
13:00:15
| RE: 4.7 Cam simple ??
IP: Logged
Message:
Snafu may be straight from D-C mis-marking these. I recently had same problem from a dealer and someone else with a different source. I wouldn't have known either if it weren't for all the info available here.
|
Demon Dakota
DakotaEnthusiast
6/15/2003
14:07:25
| RE: 4.7 Cam simple ??
IP: Logged
Message:
OK, by left I meant when looking at the engine/pulling it apart. That's correct, right? :)
K&N Drop in AF (CAI during summer months)
True Dual exhaust and removed third cat
HO Cams & HO Intake
FASTMAN 70mm TB
Autolite 3923 Plugs
TPS @ .76 VDC
IAT Adjuster Mod
14.52@94.2 MPH at Silver Dollar Raceway
|
slow2dak
Dodge Dakota
JOIN HERE
6/15/2003
21:40:52
| RE: 4.7 Cam simple ??
IP: Logged
Message:
yeah thats right demon.
02 4.7/Auto RC Sport
3.55 and a one legged wonder
removed 3rd cat, single 3" w/flowmaster
tps .701
relocated IAT
Adjustable ECT sensor
K & N drop in
Removed rubber flap
Unplugged LPS(soon to be adjustable)
All on street tires
Best 1/4: 15.20 @ 89.52
|
McyMike
Dodge Dakota
JOIN HERE
6/16/2003
11:51:04
|  RE: 4.7 Cam simple ??
IP: Logged
Message:
Well just got off the phone with buymopar.com. They did send the wrong cams. I got the short ones...that means another Dak owner got a pair of the long ones. MOPAR.com was helpful..sending out the right cam before I return the other. For info the 11AB cams are the 18"" The 12AB are the 19"
Mike
|
paysonbadboy
Dodge Dakota
JOIN HERE
6/17/2003
00:34:36
| RE: 4.7 Cam simple ??
IP: Logged
Message:
So how about my waranty if I installed a pair of those cams in my 2003 4.7?
Does it void the waranty doing the cam swap?
|
McyMike
Dodge Dakota
JOIN HERE
6/18/2003
08:05:04
| RE: 4.7 Cam simple ??
IP: Logged
Message:
The cams are stock OEM in the 4.7 Grand Cherokee. Don't think the dealer (DODGE) would really ever know they were in there unless you told them. I was going to have the dealer install and they had no issues with warranty...installing Friday (if the right cam comes in)will save about $400.00.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
