| From | Message |
OffRoad322
Unregistered
JOIN HERE
5/20/2001
21:21:09
|
 Subject: 3.9L Ignition System
IP: Logged
Message:
I have a 1997 Dakota with a 3.9L V6 in it. I'm about to buy some ignition parts for it and I would like some advice. This is what I was going to get:
MSD 6A
MSD Blaster SS Coil
Universal Wireing Harness
MSD Super Conductor Wires
Borg Warner Cap & Rotor
Autolite 3923 Plugs (gapped at .045?)
Is this the best I can do? Or should I buy something else for each category? I was especially wondering about the MSD Blaster SS Coil?
Thanks for the help.
|
Bernd
Gen III
5/21/2001
10:00:46
|  RE: 3.9L Ignition System
IP: Logged
Message:
Everything looks good. Contact MSD on the 6A though...they have an "Odd-Fire" version for our
V6's. (The 6200 works just fine though.)
On the Blaster-SS, you will need to find a spot to install is (drilling required). I had mounted mine on the passenger fender.
- Bernd
1997 Dodge Dakota SLT - V6
Supercharged @ 10#
|
OffRoad322
Unregistered
JOIN HERE
5/21/2001
19:06:57
| RE: 3.9L Ignition System
IP: Logged
Message:
Bernd-
What kind of set up do you have for intake? Do you have to take yours off every two years for smog. I have the Airaid Intake for our 3.9L and it has to be taken off for smog. If I mount the Blaster coil onto the passenger how am I going to get the original air box on for smog?
Also what gap do you think I should use? .045? less or more? What does MSD recommend?
|
trebbs
Dodge Dakota
JOIN HERE
7/27/2013
07:54:23
| RE: 3.9L Ignition System
IP: Logged
Message:
Hi I was wandering? My 1997 3.9 dakota 2dr sport was stolen and I need to have someone to send me info on how to install a new ignition as we speak the whole ignition is exposed right down to the wee bronze screws And looks pretty straight forward to relace just need to know if there is any tricks I need to know before installing
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
