| From | Message |
TJ
Dodge Dakota
JOIN HERE
5/18/2003
18:57:39
|
 Subject: Please help... M1 install
IP: Logged
Message:
I just installed my M1 on my 02 cc R/T and my check engine light is on. When I test drove it and came back I realized that the hose that goes from the passenger side valve cover to the air hat was dissconnected. I reconnected it and it is still on. Is this my problem? How do I reset the computer? Any help would be appreciated.
|
mo-par
Dodge Dakota
JOIN HERE
5/18/2003
19:01:47
|  RE: Please help... M1 install
IP: Logged
Message:
why don't you check the codes before you reset the pcm........key on/off 3X leave it on the 3rd time and write down the "P" codes then look them up at www.obdii.com
|
TJ
Dodge Dakota
JOIN HERE
5/18/2003
19:02:59
| RE: Please help... M1 install
IP: Logged
Message:
I read somewhere on here that if you disconnect the negative on the battery and turn your key to the on position for 15 second it would reset the computer. I did that and it is still on.
|
mo-par
Dodge Dakota
JOIN HERE
5/18/2003
19:05:37
|  RE: Please help... M1 install
IP: Logged
Message:
see above /\
|
TJ
Dodge Dakota
JOIN HERE
5/18/2003
19:09:13
| RE: Please help... M1 install
IP: Logged
Message:
Idle air control stepper motor circuit malfunction. Can you help me out with that.
|
mo-par
Dodge Dakota
JOIN HERE
5/18/2003
19:12:27
| RE: Please help... M1 install
IP: Logged
Message:
that would be the IAC "Idle air control" did you plug the harness in? also if you did turn the key all the way to START and hold it you didn't reset the pcm
|
TJ
Dodge Dakota
JOIN HERE
5/18/2003
19:21:49
| RE: Please help... M1 install
IP: Logged
Message:
All the harnesses are plugged back in that I can see. Can you tell me where that one is located? Then how do I reset the pcm. Also thanks for your help so far man.
|
mo-par
Dodge Dakota
JOIN HERE
5/18/2003
19:34:21
| RE: Please help... M1 install
IP: Logged
Message:
"I read somewhere on here that if you disconnect the negative on the battery and turn your key to the on position for 15 second it would reset the computer. I did that and it is still on."
/\
just make sure you turn the key all the way to start and hold it for at least 30 sec.
Here are some sites you might want to review about M1 installs.
http://www.abcs.com/cooke/indyram/MPIntake.html
http://www.dakotart.com/faqarticles/m1_install_instructions.htm
http://www.steigerperformance.com/MPIINSTALL/
|
mo-par
Dodge Dakota
JOIN HERE
5/18/2003
21:34:21
|  RE: Please help... M1 install
IP: Logged
Message:
so how's it going ????
|
TJ
Dodge Dakota
JOIN HERE
5/18/2003
23:15:37
| RE: Please help... M1 install
IP: Logged
Message:
Sure enough man. I forgot to plug in the IAC connection or whatever its called on the back of the throttle body. All is well now. Thanks for your help man.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
