Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
22:07:51 - 04/24/2024

Dakota Performance
FromMessage
xplikt
GenIII
 User Profile


4/17/2003
14:55:33

Subject: 4.56s going in on Tuesday!
IP: Logged

Message:
I am having my 4.56s installed next Tuesday. I have been waiting a while to get these installed. I bought an RX-7, so I didn't have the money to get the install. Now I do.

In addition, in another couple weeks I am getting R/T rims and new tires too.

It's going to be a little more fun driving around the streets of Spokane, lol.

-Mike
http://www.dodgetruckworld.com/xplikt/
2002 2WD RC SLT 4.7L 5spd 3.92 LSD
MBRP Single in/out | straight piped 3rd cat | turndown tip
Full Hotchkis (bars, springs, shocks) and RAS
Shaved emblems and antennae
150BM fan | removed clutch | HD Radiator

R/Truck
Dodge Dakota
JOIN HERE
 Email

4/17/2003
16:07:11

RE: 4.56s going in on Tuesday!
IP: Logged

Message:
4.56 gears and your 1st gear! You need to pull some stumps out of the ground or something. Holy Moly... lol!

Should be lots of fun.





xplikt
GenIII
 User Profile


4/17/2003
16:16:06

RE: 4.56s going in on Tuesday!
IP: Logged

Message:
Yeah, first gear probably wont be needed much on the street anymore, but 2nd and 3rd will be a whole lot more fun. At least my stock tires are 29" right now. When I go to the R/T wheele I'll probably be running 26" or 27" though.

-Mike
http://www.dodgetruckworld.com/xplikt/
2002 2WD RC SLT 4.7L 5spd 3.92 LSD
MBRP Single in/out | straight piped 3rd cat | turndown tip
Full Hotchkis (bars, springs, shocks) and RAS
Shaved emblems and antennae
150BM fan | removed clutch | HD Radiator

R/Truck
Dodge Dakota
JOIN HERE
 Email

4/17/2003
17:10:54

RE: 4.56s going in on Tuesday!
IP: Logged

Message:
With your 4.56 gears I wouldn't get that low of a tire ratio, get some 275/50/17 and have a nice 28" tire combo.

Any lower and you will be buzzing down the highway.



xplikt
GenIII
 User Profile


4/18/2003
10:14:36

RE: 4.56s going in on Tuesday!
IP: Logged

Message:
I want to go to 27" at the least, but I'd prefer a shorter sidewall. I can't keep at 29", it rubs too much on the Hotchkis drop (driver front).

Crusing down the highway at 3-3.25K isn't too bad. I mean, I wont be able to take trips at 90mph constant, but I shouldn't be doing that anyways.

-Mike
http://www.dodgetruckworld.com/xplikt/
2002 2WD RC SLT 4.7L 5spd 3.92 LSD
MBRP Single in/out | straight piped 3rd cat | turndown tip
Full Hotchkis (bars, springs, shocks) and RAS
Shaved emblems and antennae
150BM fan | removed clutch | HD Radiator

xplikt
GenIII
 User Profile


4/21/2003
17:15:23

RE: 4.56s going in on Tuesday!
IP: Logged

Message:
I am going to be running 25.7" Dunlop SP8000 tires now on R/T rims. No first gear at all now, but I am keeping my current tires for trips, hauling, and when the weather turns to sh1t, but not time for the snows yet.

Between all the vehicles at my house, we have a warehouse of tires in my garage.

-Mike
http://www.dodgetruckworld.com/xplikt/
2002 2WD RC SLT 4.7L 5spd 3.92 LSD
MBRP Single in/out | straight piped 3rd cat | turndown tip
Full Hotchkis (bars, springs, shocks) and RAS
Shaved emblems and antennae
150BM fan | removed clutch | HD Radiator

FLDak
Dodge Dakota
JOIN HERE
 Email

4/23/2003
15:42:35

RE: 4.56s going in on Tuesday!
IP: Logged

Message:
xplikt:
Did you get your gears installed yet?
How do you like'em?



kicker01
Dodge Dakota
JOIN HERE
 Email

4/23/2003
16:43:43

RE: 4.56s going in on Tuesday!
IP: Logged

Message:
wana sell your old gears?



AndrewM
Dodge Dakota
JOIN HERE
 Email

4/23/2003
17:12:41

RE: 4.56s going in on Tuesday!
IP: Logged

Message:
Sorry kicker. I've had dibs on xplikt's 3.92 gears for a couple months. But, if the world collides and I don't end up getting them (highly unlikely, but you never know), I'd drop him an email to be 1st runner-up.

Btw xplikt, did you get them changed out yesterday?



Crusty
GenIII
 User Profile


4/23/2003
20:31:22

RE: 4.56s going in on Tuesday!
IP: Logged

Message:
I have some 3.92's for sale if anyone wants em. they have 1,800 miles on them. Will fit 9.25 axle. $170 takes em.
idahomx@hotmail.com

2002 CC 4.7L 3.55LSD

xplikt
GenIII
 User Profile


4/23/2003
23:47:32

RE: 4.56s going in on Tuesday!
IP: Logged

Message:
Nope, the shop /forgot/ to take my name down and didn't have me scheduled in, but knew I was to come in sometime that week. Jeeez. I am getting them changed Friday.

-Mike
http://www.dodgetruckworld.com/xplikt/
2002 2WD RC SLT 4.7L 5spd 3.92 LSD
MBRP Single in/out | straight piped 3rd cat | turndown tip
Full Hotchkis (bars, springs, shocks) and RAS
Shaved emblems and antennae
150BM fan | removed clutch | HD Radiator

xplikt
GenIII
 User Profile


4/23/2003
23:49:56

RE: 4.56s going in on Tuesday!
IP: Logged

Message:
I am picking up my R/T wheels tomorrow and getting Dunlop SP9000s in Friday.


-Mike
http://www.dodgetruckworld.com/xplikt/
2002 2WD RC SLT 4.7L 5spd 3.92 LSD
MBRP Single in/out | straight piped 3rd cat | turndown tip
Full Hotchkis (bars, springs, shocks) and RAS
Shaved emblems and antennae
150BM fan | removed clutch | HD Radiator

dweishaar
GenIII
 Email User Profile


4/24/2003
00:09:42

RE: 4.56s going in on Tuesday!
IP: Logged

Message:
where did you end up getting your gears, and how much?

The Baja Dak

   P 1


Post a reply to this message:

Username Registration: Optional
All visitors are allowed to post messages


Name:
Email:
Notify me when I get a reply to my message:Yes  No

Icons:            

          

Subject:
Message:
 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.