| From | Message |
Jim
Dodge Dakota
JOIN HERE
4/12/2003
17:46:27
|
 Subject: Throttle Body Problem:
IP: Logged
Message:
I have a 2000 R/T and I have been having trouble with my TB sticking. It is a 52mm F&B and it is only about two weeks old. It sticks when running and doesn't want to close all the way. I have tried lubing up the coil and that doesn't seem to work anyone else have this problem or do I just have a defective piece. I have also adjusted the TV Cable numerous times.
|
Willy
Dodge Dakota
JOIN HERE
4/12/2003
17:59:43
|  RE: Throttle Body Problem:
IP: Logged
Message:
did you remember to route the cable under the little cam on the linkage
|
Jim
Dodge Dakota
JOIN HERE
4/12/2003
18:04:37
| RE: Throttle Body Problem:
IP: Logged
Message:
No I didn't know of any cable that had to be routed. What cable are you talking about??
|
Willy
Dodge Dakota
JOIN HERE
4/12/2003
18:24:40
| RE: Throttle Body Problem:
IP: Logged
Message:
the throttle cable
|
Jim
Dodge Dakota
JOIN HERE
4/12/2003
18:31:48
| RE: Throttle Body Problem:
IP: Logged
Message:
I just reconnected all the cables the way they were before.
|
Pistolero
Dodge Dakota
JOIN HERE
4/12/2003
23:16:25
| RE: Throttle Body Problem:
IP: Logged
Message:
The F&B's have a roller cam on the throttle cable linkage...round, about the size of a nickel, with a groove in it. The throttle cable must go on the bottom side of the cam to work right. If yours is like my V6, there was no cam on the stock linkage. Be worth a check...
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
