| From | Message |
RTFUN
Dodge Dakota
JOIN HERE
4/09/2003
12:30:13
|
 Subject: Hypertech 3 or Mopar Pcm
IP: Logged
Message:
I have a 2000 RT and was wondering which is better. I read a lot here about how impressive the mopar PCM is, but the gas prices aren't right now. I don't want to be locked down putting 92 octane into my truck. Hypertech says you can choose your octane and are claiming some big power gains which are close to the mopar PCM. Which one should I get?
|
figitdotcom
R/T
 
4/09/2003
13:05:59
|  RE: Hypertech 3 or Mopar Pcm
IP: Logged
Message:
I am in the same boat, I had picked to go with the mopar pcm but yeah these gas prices suck.
-m
|
Ryan
Dodge Dakota
JOIN HERE
4/09/2003
13:11:21
| RE: Hypertech 3 or Mopar Pcm
IP: Logged
Message:
I would go with the hypertech pcm. Better price on your wallet for gas and better power. I can get you one for $325. Visit my site and check them out: www.v8performance.com
|
ScojoDak
Dodge Dakota
JOIN HERE
4/09/2003
15:08:48
| RE: Hypertech 3 or Mopar Pcm
IP: Logged
Message:
I recently bought the hypertech for my 99 5.2 CC. It woke up the sleeping giant big time. And yes, with the gas prices they are, I use the feature to toggle from 89 to 92 octane fuel. Good buy for me. Just my $.02
|
Daktrep9298
Dodge Dakota
JOIN HERE
4/09/2003
16:12:01
| RE: Hypertech 3 or Mopar Pcm
IP: Logged
Message:
Does the Hypertech work with the older OBD-I computers? I have the 5.9L out of a 95 Ram and I was just wondering if I can get a Hypertech or if I should just use, the Mopar PCM.
Thanks
Dan
|
kotagtx
Dodge Dakota
JOIN HERE
4/09/2003
23:22:11
|  RE: Hypertech 3 or Mopar Pcm
IP: Logged
Message:
00 with MP unit: no pinging on 87 octane, what year did the knock sensors start on the 5.9?
|
goon1
Dodge Dakota
JOIN HERE
4/10/2003
00:35:28
| RE: Hypertech 3 or Mopar Pcm
IP: Logged
Message:
would the hypertech also work on my 02, 4.7 cc? if not what options would i have?
|
Ryan
Dodge Dakota
JOIN HERE
4/10/2003
02:12:41
| RE: Hypertech 3 or Mopar Pcm
IP: Logged
Message:
Goon I think all you have is the Jet chip. Not sure what else there is.
v8Performance.com
|
al
Dodge Dakota
JOIN HERE
4/10/2003
20:17:36
| RE: Hypertech 3 or Mopar Pcm
IP: Logged
Message:
Why isnt there a mopar pcm for a 2001 r/t?
|
TexasTodd
Dodge Dakota
JOIN HERE
4/10/2003
22:06:38
|  RE: Hypertech 3 or Mopar Pcm
IP: Logged
Message:
Ryan, a jet chip for a 4.7, 2002 model?
Seen the dynos on those? LOL
|
TravisD
Dodge Dakota
JOIN HERE
4/11/2003
00:39:20
| RE: Hypertech 3 or Mopar Pcm
IP: Logged
Message:
I have a 2002 R/T and i would really like it if hypertech came out with the Power programmer III but the tech at hypertech do not make an item for my truck yet, i would really want one though. I had a jet chip on my 01 QC 4x4 with the 4.7. it was the Jet Stage 1, it did help the computer had to learn it but it did help a little, best gas milage and performance with it was with 93 octane. i would reccomend doing the High flow intake and exaust and a thermostat and going with the stage 2 instead of the stage 1, there both about the same price, and you will like it better and feel it more in the butt dyno.
|
RTFUN
Dodge Dakota
JOIN HERE
4/11/2003
00:57:39
|  RE: Hypertech 3 or Mopar Pcm
IP: Logged
Message:
Okay I just bought the Hypertech 3 programmer and 180 degree t-stat. So far I have a 3 inch catback magnaflow exhaust and the K&N FIPK. So tomorrow we'll see what happens with the performance my 2000 RT. Thanks for everybodies advice.
|
DKW
Dodge Dakota
JOIN HERE
4/11/2003
15:51:15
| RE: Hypertech 3 or Mopar Pcm
IP: Logged
Message:
For the newer 4.7 liter engines like I have in a 2002 Dakota, check out Superchips. They are developing a programmer for newer Dodge's. I contacted their sales dept. and was told it should be out around the end of May or first of June.
|
goon1
Dodge Dakota
JOIN HERE
4/11/2003
19:08:53
| RE: Hypertech 3 or Mopar Pcm
IP: Logged
Message:
i am guessing.... www.superchips.com?
|
plr7
Dodge Dakota
JOIN HERE
4/14/2003
18:49:09
| RE: Hypertech 3 or Mopar Pcm
IP: Logged
Message:
I have the b&G flash does anyone think i could get more out of my 5.9, if got the hypertech.
|
Lello
Dodge Dakota
JOIN HERE
4/15/2003
10:16:50
| RE: Hypertech 3 or Mopar Pcm
IP: Logged
Message:
Which B&G flash?? reg or M1?? M1 is the most aggressive for our trucks out there
|
plr7
Dodge Dakota
JOIN HERE
4/15/2003
14:07:01
| RE: Hypertech 3 or Mopar Pcm
IP: Logged
Message:
Lello,
I just have the regular B&G flash. Do you know of anyone that has tried this?
|
Lello
Dodge Dakota
JOIN HERE
4/15/2003
14:49:51
| RE: Hypertech 3 or Mopar Pcm
IP: Logged
Message:
According to Dave at B&G, the reg is about as aggressive or slightly less than the MP, the M1 is more aggressive mostly with timing. I had the reg and did notice a difference from stock, upgraded to M1 recently but just got my truck out from winter and haven't beat on it yet........
|
Joey
Dodge Dakota
JOIN HERE
4/15/2003
18:34:30
| RE: Hypertech 3 or Mopar Pcm
IP: Logged
Message:
do u HAVE to have the M1 for the M1 flash or could u get away with just putting a better throttle body?
|
Lello
Dodge Dakota
JOIN HERE
4/16/2003
08:08:09
| RE: Hypertech 3 or Mopar Pcm
IP: Logged
Message:
No you don't need the M1. 90% of your everyday driving will not be near your peak rpm but the additional timing will help your bottom end and midrange. You'll only hit 5400 rpm when you keep it pegged which is the shift rpm of the M1 flash.
|
Joey
Dodge Dakota
JOIN HERE
4/16/2003
16:50:24
| RE: Hypertech 3 or Mopar Pcm
IP: Logged
Message:
k thanks
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
