| From | Message |
FLAT4VW
Dodge Dakota
JOIN HERE
3/31/2003
17:45:39
|
 Subject: Offset or Center Inlet Flowmaster
IP: Logged
Message:
Hey guys,
I have a 1999 Dakota 5.2 4x4 and i want to put a sinlge in/ dual out Flowmaster Delta Flow 40 or 50 series muffler on it. My question is, do i need a center inlet or offset inlet muffler? i made a cardboard templete using the measurements that Flowmaster gives (9.75"W x 13"L for the 40 series & 9.75"W x 17"L for the 50 series) and it looks close both ways. What have you guys used?
also, my plan is to have dual tailpipes exiting under the bumper, if that makes a difference.
Thanks alot,
John
and yes, i did search for this, but i couldnt find anything, so if its been asked before, sorry!
|
chesire17201
Dodge Dakota
JOIN HERE
4/01/2003
10:20:33
|  RE: Offset or Center Inlet Flowmaster
IP: Logged
Message:
i would go with the center inlet, but why dual out, your exhaust gas is just gonna fight in the muffler for which pipe to go out........me i use the flow 10 series, one chamber race muffler, 2.5 center in/out and a turndown after the muffler..........but if you don't want VERY VERY loud, don't do that......
|
FLAT4VW
Dodge Dakota
JOIN HERE
4/01/2003
10:47:19
|  RE: Offset or Center Inlet Flowmaster
IP: Logged
Message:
Thanks, I want the dual out because I have to have dual tips under the bumper, IMO that is badass! Yeah, a 10 series would drive me insane on the highway, i think im going to go with a 50 series.
Im not looking to gain any power from this muffler, i just want sound to hear while im driving. Do you think i will loose any low-end power with this set-up?
|
chesire17201
Dodge Dakota
JOIN HERE
4/02/2003
09:54:58
| RE: Offset or Center Inlet Flowmaster
IP: Logged
Message:
yeah 50 series will give a nice rumble w/out being a headache, me i just like to piss people off when i drive, so i put the 10 series on all my vehicles w/v8's, and surprisingly they actually still help hp&tq, even though they are only 6 inches long and have just 1 baffle in them.......
|
FLAT4VW
Dodge Dakota
JOIN HERE
4/02/2003
10:40:31
| RE: Offset or Center Inlet Flowmaster
IP: Logged
Message:
Thanks dude, looks like im going to go with a 50 series 2.5" Center in/ dual 2" out!
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
